Abstract:High-temperature Gas-cooled Reactor Pebble-bed Module (HTR-PM), which is designed by Tsinghua university of China, is under construction in Shidao Bay of China. It will be the world’s first pebble-bed type modular HTGR commercial demonstration plant. In HTR-PM project, steam-Rankine cycle has used in the power conversion system because it represents current state-of-the-art technology. Meanwhile, helium turbine for HTGR has been investigated for many years in Tsinghua University. Mock-up machine for HTR-10GT has been built. Helium turbine for 250MW HTGR, which is based on HTR-PM, has completed conceptual designed. However, supercritical carbon dioxide (S-CO2) Brayton cycle has shown to have great potentials for future HTGR technology in recent years because of its critical properties. Helium turbine cycle and S-CO2 Brayton cycle are both candidates for future HTGR. Therefore, comparative study is conducted in this paper. Comparison is focused on achievable efficiencies for each cycle mentioned above and on cycle layout with respect to simplicity and compactness, which primarily determines capital cost. Firstly, the physical model for helium turbine cycle with recuperator and intercooler is built and cycle performance is analyzed based on the parameters of HTR-PM. Then the model for S-CO2 Brayton cycle with recompression is also built and the cycle efficiency is analyzed with the same parameters of HTR-PM. Secondly, comparison between helium turbine cycle and S-CO2 Brayton cycle is made from the view of thermodynamics. Moreover, parameters optimization of both cycles based on HTR-PM is carried out. At last, advantage and drawback of both cycles are discussed from the engineering point. In conclusion, cycle simplicity and technology maturity of helium turbine cycle are better than S-CO2 Brayton cycle. But on the other side, smaller size equipment and less compression work of S-CO2 Brayton Cycle are more competitive than helium turbine cycle. Helium turbine with higher temperature and S-CO2 Brayton Cycle with higher pressure can achieve higher efficiency than steam Rankine cycle.

ICONE15-10368 GEARBOX SCHEME IN HIGH TEMPERATURE REACTOR HELIUM GAS TURBINE SYSTEM

Study on Vertical High Speed Gearbox in HTGR Helium Gas Turbine System

Thermodynamic Analysis and Optimization of Helium Turbine Cycle of Commercial High Temperature Gas-Cooled Reactor

Study on Fundamental Features of Helium Turbomachine for High Temperature Gas-Cooled Reactor

Study on Off-Design Steady State Performances of Helium Gas Turbocompressor for HTGR-GT

A Design of Simulation Experiment System for the Helium Turbine

Preliminary Study on Features of Key Components for HTGR Helium Turbine System

Experimental Study on Performance of Helium Low Pressure Compressor of HTR-10GT

Htgr Helium Turbine Conceptual Design by Genetic/Gradient Optimization

Transmission Scheme Design of Gearbox for 15MW Offshore Semi-direct-driven Wind Turbine

The design for gearbox of pitch-controlled megawatt wind turbine

Comparative Study of Helium Turbine Brayton Cycle and Supercritical CO2 Brayton Cycle for HTGR

Analysis of Characteristics of Different Working Fluids for Gas Turbine Cycle with High Temperature Gas-Cooled Reactor

Numerical Study of Film Cooling and Particle Depositions in Turbine Blade of High-Temperature Gas-Cooled Reactor

Technical Assessment of Gas Turbine Cycle for High Temperature Gas-Cooled Reactor

Engineering Design , Analysis and Testing of Helium Circulator used in HTR-PM

ICONE23-1474 DESIGN AND THERMAL-HYDRAULIC ANALYSIS OF SUPERCRITICAL STEAM GENERATOR IN HIGH-TEMPERATURE GAS-COOLED REACTOR

Parametric studies on different gas turbine cycles for a high temperature gas-cooled reactor

Study on Design of the Magnetic Bearings for Supporting a HTR-10GT Helium Turbine

OPTIMIZATION OF ACTIVE MAGNETIC BEARINGS' POWER SUPPLY SYSTEM FOR MAIN HELIUM FAN IN HIGH TEMPERATURE GAS-COOLED REACTOR

A Study On Performance Characteristics For Closed Brayton Cycle In Inventory Regulation