Abstract:At present, power cycles used in HTGR are indirect steam Rankine cycle and helium Brayton cycle. Using water or helium as working fluid which transform thermal energy into mechanical energy for HTGR power cycle has many disadvantages. Steam cycle could choose steam system which is similar to conventional coal-fired power plant, but because of the limit of material and equipments, there is big temperature difference between the steam and the helium, that makes big loss of thermal power and lowers the cycle efficiency. Helium can reach a high temperature in HTGR Brayton cycle and it has good stability, but because of helium has big isentropic exponent and low density, it is difficult to compress and makes helium turbine has shorter blades and more stages than normal gas turbine. Carbon dioxide has good thermal stability and physical properties. To avoid the reaction of CO2 with graphite and canning of fuel element at high temperature, it should be used in an indirect cycle as second loop working fluid. CO2 has appropriate critical pressure and temperature (7.38MPa, 304.19K) and can choose three types of cycle: supercritical cycle, subcritical-pressure cycle and trans-critical-pressure cycle (CO2 sometimes works under supercritical pressure, some times under subcritical-pressure). Carbon dioxide cycle works in a high pressure, so it makes pressure loss lower. When CO2 works close to its critical point, its density become larger than other conditions, and not change very much, this permits to reduce compress work. The thermal physical properties of carbon dioxide are totally different from helium due to CO2 works as real gas in the cycle. That causes the calculation of CO2 thermal physical properties, heat transfer and power cycle efficiency become difficult and need to be iterated. A systematic comparison between helium and carbon dioxide as working fluid for HTGR has been carried out. An empirical equation had been selected to estimate the thermal physical properties of carbon dioxide. Three types of carbon dioxide power cycle have been analyzed and the thermal efficiency has been calculated. A detailed introduction to the basic calculation process of the CO2 cycle thermal efficiency had been presented in the paper.

Technical Assessment of Gas Turbine Cycle for High Temperature Gas-Cooled Reactor

Parametric studies on different gas turbine cycles for a high temperature gas-cooled reactor

Thermodynamic Analysis and Optimization of Helium Turbine Cycle of Commercial High Temperature Gas-Cooled Reactor

A Study on Different Thermodynamic Cycle Schemes Coupled with a High Temperature Gas-Cooled Reactor

Study on Fundamental Features of Helium Turbomachine for High Temperature Gas-Cooled Reactor

Study on Off-Design Steady State Performances of Helium Gas Turbocompressor for HTGR-GT

Comparative Study of Helium Turbine Brayton Cycle and Supercritical CO2 Brayton Cycle for HTGR

Preliminary Study on High Temperature Gas-Cooled Reactor-Combined Cycle Power

Icone23-1057 parametric studies on thermal cycle of htgr with he-co_2 mixed working medium

Exergy analysis of HTGR-GT

Primary study of steady states of HTGR-GT

Preliminary Study on Technical Base and Future Potential of High Temperature Gas-cooled Reactor

Modeling and Analyzing of Simple Combined Cycle of Modular High Temperature Gas Cooled Reactor

Preliminary Study on Features of Key Components for HTGR Helium Turbine System

Characteristics Analysis of Combined Cycle Coupled with High Temperature Gas-Cooled Reactor Based on Progressive Optimization

Thermodynamic Analysis of Indirect Combined Cycle for HTR

Dimensionless Analysis of Pressure Drop and Heat Transfer on HTGR Coupled with Closed Brayton Cycle

Primary Study on Carbon Dioxide Power Cycle of Htgr

PARAMETRIC INVESTIGATION OF SUPERCRITICAL CARBON DIOXIDE BRAYTON CYCLE FOR HIGH TEMPERATURE GAS-COOLED REACTOR (HTGR)

Evaluation , Comparison and Optimization of the Compact Recuperator for the High Temperature Gas-Cooled Reactor ( HTGR ) Helium Turbine System

Htgr Helium Turbine Conceptual Design by Genetic/Gradient Optimization