Abstract:To understand the effect of CaCl2 addition on the dephosphorization ability of steelmaking slags, laboratory experiments were carried out to study the phosphorus distribution between CaO–SiO2–FeOx–P2O5–CaCl2 slags and carbon-saturated iron at steelmaking temperature. The phosphorus distribution ratio between slag and pure iron foil (\( L_{\text{P}}^{{{\text{Fe-}}\gamma }} \)) was measured by equilibrium experiments and converted into the phosphorus distribution ratio between slag and carbon-saturated iron (\( L_{\text{P}}^{{\text{Fe}}{-}{\text{C}}} \)) using thermodynamic calculations. The influential mechanism of CaCl2 was also discussed based on the phases in the slags. It was found that the addition of CaCl2 is beneficial for the improvement of \( L_{\text{P}}^{{{\text{Fe}}{-}{\text{C}}}} \). In the slag with basicity (R = [w(CaO)/w(SiO2)]) of 1.0, the P content in the liquid slag was increased by the addition of CaCl2. When the basicity is sufficiently high (e.g., R≥1.5), the addition of CaCl2 enhances the generation of P-rich solid phases, including both 2CaO·SiO2–3CaO·P2O5 (C2S–C3P) and Ca5Cl(PO4)3. Compared with CaCl2-free slags, CaCl2 addition in BOF slags doesn't evidently change the effects of slag basicity and FeOx content. With the increase of slag basicity (1.0 to 2.0), the amount of C2S–C3P solid solution in the slag climbs obviously, resulting in a higher \( L_{\text{P}}^{{{\text{Fe}}{-}{\text{C}}}} \) both in CaCl2-added slags and CaCl2-free slags, while \( L_{\text{P}}^{{{\text{Fe}}{-}{\text{C}}}} \) increases first and then decreases when the FeOx content varies from 15 to 35 pct in this study.

Selective Crystallization Behavior of Cao-Sio2-Al2o3-Mgo-Feto-P2o5 Steelmaking Slags Modified Through P2o5 and Al2o3

Investigation on Viscosity and Nonisothermal Crystallization Behavior of P-Bearing Steelmaking Slags with Varying TiO2 Content

Thermodynamic Analysis of Mineral Phase Composition of Steel Slag System

Effect of Al2O3 on the Molten Slag Microstructure Information by Molecular Dynamics Simulation and Experimental Analysis

Investigation of the Effect of P2O5 and CaF2 on the Crystallization Behavior of La2O3-bearing Calcium–silicate–aluminum Slags Using the Single Hot Thermocouple Technique

Polymeric Structure Evolution Behavior Analysis of Aluminosilicate-Based Smelting Slag

Investigation of P2O5 on the Break Temperature and Phase Composition of Slag from the Double Slag Converter Steelmaking Process

Effect of Al2o3 Addition on the Precipitated Phase Transformation in Ti-Bearing Blast Furnace Slags

Influence of Fe2O3 Content on Crystallization Behavior of Slag at Cooling Process

Effect of High Temperature Reconstruction and Modification on Phase Composition and Structure of Steel Slag

The Effect of P 2 O 5 on the Crystallization Behaviors of Ti-Bearing Blast Furnace Slags Using Single Hot Thermocouple Technique

Effect of Al2O3 Content on the Viscosity and Structure of CaO-SiO2-Cr2O3-Al2O3 Slags

Effect of unmelted lime on the element distribution behavior on a CaO-SiO2-MgO-Al2O3-FeO-CaF2(-Cr2O3) slag

Effect of CaCl2 Addition on Phosphorus Distribution Between CaO–SiO2–FeOx–P2O5 Slag and Carbon-Saturated Iron at Steelmaking Temperature

Effect of Cr2O3 on Physicochemical Properties of CaO-SiO2-FetO Slags during BOF Smelting Process of Chromium-Bearing Iron

Effect of CaO/SiO2 and P2O5 on the Viscosity of FeO-SiO2-V2O3-CaO-P2O5 Slags

Study on the Melting Temperature of CaF2-CaO-MgO-Al2O3-TiO2 Slag under the Condition of a Fixed Ratio of Titanium and Aluminum in the Steel during the Electroslag Remelting Process

Investigation on Crystallization of CaO‐Al2O3‐B2O3‐BaO Slag Using Differential Scanning Calorimeter and In Situ High‐Temperature Raman Spectroscopy

Combined Effect of SiO2 and O2 on the Crystallization Behavior of Modified Ti-Bearing Blast Furnace Slag

Structural Characteristics and Hydration Kinetics of Modified Steel Slag

Steel Slag Reconstruction Experiment by Reduction FeOx and Its Mineral Composition