Abstract:Multi‐resin hybrid composites laminate preparation. This research investigates the influence of kevlar and glass fiber reinforcements on the mechanical and thermal properties of epoxy/vinyl ester (hybrid resin) composite. The hybrid resin was synthesized by achieving an interpenetrating network between epoxy and vinyl ester. The composites were characterized using tensile, flexural, impact, and thermo‐gravimetric analysis (TGA). Scanning electron microscopy was employed to analyze surface morphology whereas Fourier‐Transformation Infrared Spectroscopy (FT‐IR) was used to investigate the possible interaction between the constituents of the composites. The findings have shown a notable improvement in the mechanical properties after the hybridization of the resin. For reference, the tensile strength of glass/hybrid resin and kevlar/hybrid resin composites were observed to increase by 8.33% and 23.65%, as compared to glass/epoxy and kevlar epoxy composites respectively, whereas, the bending strength of these composites was improved by 8.36% and 30.61%, respectively. TGA also showed an enhanced thermal stability of the hybrid resin‐based composites. Such improvements are noticed due to multi‐resin incorporation (the oxirane group of epoxy reacts with the hydroxyl group of vinyl ester), confirmed by the FTIR, TGA, and morphological analysis. This study signifies that the proposed hybrid composites are better in terms of strength and modulus relative to conventional metallic materials. Highlights The paper presents the development of novel hybrid resin, reinforced with synthetic fibers. Hybrid resin is imparted positively and is highly favorable in improving the mechanical properties of composites. The tensile strength of novel composites is increased by 8.33% and 23.65% relative to their base specimens, and a similar trend is observed in flexural and impact analysis. Fractured analysis showed that composite laminates deteriorated more intensely due to cohesive matrix fracture; adhesion failure was not observed at all, as evidenced by the emergence of micro‐cracks in resin. Developed novel composites exhibited maximum thermal stability; residual char in glass/epoxy/vinyl‐ester composite attained 17.81% higher, whereas kevlar/epoxy/vinyl‐ester achieved 3.56% relative to glass/epoxy and kevlar/epoxy base samples.

Silicone–acetylene Hybrid Resin and Composite

Novel Silicon-Modified Phenolic Novolac Resins: Non-isothermal Curing Kinetics, and Mechanical and Thermal Properties of Their Biofiber-Reinforced Composites

Silicone-modified Phenolic Resin: Relationships Between Molecular Structure and Curing Behavior

Synthesis and Characterization of a Novel Heat Resistant Epoxy Resin Based on N,N′-bis(5-hydroxy-1-naphthyl)pyromellitic Diimide

Silicon Bearing Organic–Inorganic Hybrid Epoxy Resin for the Development of Novel Fiber Reinforced Polymer Composites: A Thermomechanical Evaluation

Synthesis and thermal stability of a novel acetylene end-capped silicon-containing polyimide coupling agent with a silane pendant group

Post-Heat Flexural Properties of Siloxane-Modified, Glass-Fiber-Reinforced Epoxy/Phenolic Composites

Preparation and Thermo‐mechanical Properties of Heat‐resistant Epoxy/silica Hybrid Materials

Preparation, Thermal Properties, and Flame Retardance of Epoxy–silica Hybrid Resins

Synthesis of a comb-like silicone-epoxy co-polymer with high thermal stability and mechanical properties for ablative materials

Synthesis and properties of silicon-containing poly(diethynylbenzen-co-phenoxyphenoxybenzenediacetylene)s

Synthesis and structure evolution of phenolic resin/silicone hybrid composites with improved thermal stability

Development of chopped glass fiber composites with difunctional benzoxazine and bio‐based phthalonitrile copolymer: A study of mechanical and thermomechanical properties

Preparation of Heat-Resistant Epoxy/Silica Hybrids Through A Novel Sol-Gel Process

Preparation, cure kinetics, and thermal properties of novel acetylene terminated silazanes

Melt fluidity and thermal property of thermosetting siloxane-containing polyimide resins and their organic/inorganic hybrid characteristics

Mechanical property and thermal stability of short carbon fiber reinforced polysulfonamide composites

The influence of mesoporous silica modified with phosphorus and nitrogen-containing hyperbranched molecules on thermal stability, combustion behavior, and toxic volatiles of epoxy resin

Investigation on curing reaction of phthalonitrile resin with nanosilica and the properties of their glass fiber‐reinforced composites

Oxidation and ablation behaviors of carbon fiber/phenolic resin composites modified with borosilicate glass and polycarbosilane interface

Development and characterization of kevlar and glass fibers reinforced epoxy/vinyl ester hybrid resin composites