Abstract:In this dissertation, the relationships between structure-mechanical properties-deformation mechanisms in face-centered cubic (FCC) and body-centered cubic (BCC) metallic nanowires have been studied using in situ TEM nanomechanical testing. It is well known that smaller is stronger and the widely-observed size effect is believed to arise from dislocation interactions inside nanocrystals. However, the interaction mechanisms in small-volume nanocrystals remain unexplored. Here, it was found that surface-nucleated dislocations can strongly interact inside the confined volume of Au nanowires, which led to a new type of dislocation-originated stacking fault tetrahedra (SFT), at variance to the widely-believed vacancy-originated SFT. The atomic-scale processes of nucleation, migration and annihilation of dislocation-originated SFT were revealed, shedding new light onto the strain hardening and size effect in small-volume materials. Although nanoscale twinning is an effective mean to enhance the strength of metals, twin-size effect on the deformation and failure of nanotwinned metals remains largely unexplored, especially at the minimum twin size. Here, a new type of size effect in nanotwinned Au nanowires is presented. As twin size reaches the angstrom-scale, Au nanowires exhibit a remarkable ductile-to-brittle transition that is governed by the heterogeneous-to-homogeneous dislocation nucleation transition. Quantitative measurements show that approaching such a nanotwin size limit gives rise to the ultra-high strength in Au nanowires, close to the ideal strength limit of perfect Au. Twinning is a fundamental deformation mode that competes against dislocation slip in crystals. At the nanoscale, higher stresses are required for plastic deformation than that in bulk, which favors twinning over dislocation slip. Indeed, deformation twinning has been well-documented in FCC nanocrystals. However, it remains unexplored in BCC nanostructures. Here, it shows that twinning is the dominant deformation mode in BCC-tungsten nanocrystals. A competition between twinning and dislocation slip occurs when changing the loading orientations, attributed to the defect growth controlled plasticity in BCC nanocrystals. Several important commonalities and differences in FCC and BCC nanocrystals deforming at nanoscale are further proposed. The results from this dissertation advance fundamental understanding of plastic deformation in a broad class of metals and alloys, and are of technological importance for degradation control and future design of ultra-strength nanomaterials.

Atomic-scale Investigation of Interface-Facilitated Deformation Twinning in Severely Deformed Ag-Cu Nanolamellar Composites

In Situ Atomistic Observation of the Deformation Mechanism of Au Nanowires with Twin–twin Intersection

Size-Dependent Dislocation-Twin Interactions

Deformation-induced Interfacial Transition Zone in Cu/V Nanolamellar Multilayers

Interactions Between Dislocations and Penta-Twins in Metallic Nanocrystals

Two softening stages in nanotwinned Cu

Discrete Twinning Dynamics and Size-Dependent Dislocation-to Twin Transition in Body-Centred Cubic Tungsten

Bending-induced Deformation Twinning in Body-Centered Cubic Tungsten Nanowires

Unstable Twin In Body-Centered Cubic Tungsten Nanocrystals

In Situ TEM Study on the Nanomechanical Behaviors of Metallic Nanowires

Role of Interfacial Transition Zones in the Fracture of Cu/V Nanolamellar Multilayers

Interaction between deformation twins and interfaces in Cu/Ag alloys

In Situ Atomic-Scale Observation of Twinning-Dominated Deformation in Nanoscale Body-Centred Cubic Tungsten

Deformation Twinning in Octahedron-Based Face-Centered Cubic Metallic Structures: Localized Shear-Force Dipoles Drive Atomic Displacements

Atomic-scale observation of nucleation- and growth-controlled deformation twinning in body-centered cubic nanocrystals

Atomic-scale deformation mechanisms of nano-polycrystalline Cu/Al layered composites: a molecular dynamics simulation

Plastic deformation mechanism in nanotwinned metals: An insight from molecular dynamics and mechanistic modeling

Metal-matrix nanocomposites under compressive loading: Towards an understanding of how twinning formation can enhance their plastic deformation

Dislocation mechanisms in strengthening and softening of nanotwinned materials

Atomistic mechanisms of microstructure evolution in nanotwinned polycrystals

Influence of Defects During the Tensile Deformation of Cu–Al Joint Interfaces at the Nano Scale