Abstract:We report a simple and yet powerful method to improve the performance of TiO2-based N3 dye-sensitized solar cells (DSSCs) by hydrogen-treatment of TiO2 nanostructures as photoelectrodes. The solar conversion efficiency of DSSC based on TiO2 rutile nanowires was increased from 0.28% to 0.45% after the nanowire electrode was annealed at 350°C in a pure hydrogen atmosphere. The enhanced conversion efficiency was attributed to improved charge transport as a result of increased electron density by three orders of magnitude upon hydrogenation. While the conversion efficiency was improved by 61%, the overall efficiency was still low, possibly due to the limited loading of N3 dye molecules on TiO2 nanowires. To improve dye loading, a similar study of hydrogen-treated Degussa P25 nanoparticles (H-P25) electrodes was conducted in which the conversion efficiency was enhanced by 13% compared to untreated P25. The DSSC based on H-P25 achieved a very high photocurrent, 20.81mA/cm2, and solar conversion efficiency, 9.30%, under 1sun illumination. The donor density of H-P25 was found to increase by 1.5 times compared to P25, consistent with the relatively small enhancement in overall conversion efficiency. To gain new physical insight into the dye sensitization process, ultrafast transient absorption (TA) spectroscopy was applied to probe the excited dynamics of N3 dye in ethanol solution as well as adsorbed on H-P25, P25 and ZrO2. The TA spectrum of H-P25 and P25 was dominated by N3+ generated following electron injection, which occurs in <150fs. In addition, time dependent density function theory (TDDFT) calculations of N3 and N3+ provided further insight into the origin of TA spectra as well as the related dynamic processes. The results demonstrate that hydrogenation of TiO2 electrodes can be a low cost and effective way to enhance performance of DSSC by rationally introducing bandgap states that enhanced the donor density and thereby charge transport.

Conversion Efficiency of 10.8% by a Dye-Sensitized Solar Cell Using a TiO2 Electrode with High Haze

Dye-Sensitized Solar Cells with Conversion Efficiency of 11.1%

High Efficiency of Dye-Sensitized Solar Cell and Module

Enhanced photovoltaic performance of dye-sensitized solar cells using a new photoelectrode material: upconversion YbF3-Ho/TiO2 nanoheterostructures

Improved Performance of Dye Sensitized Solar Cells Using Cu-doped TiO2 As Photoanode Materials: Band Edge Movement Study by Spectroelectrochemistry

Integrated Dye-Sensitized Solar Cell Module with Conversion Efficiency of 8.2%

Efficiency Improvement in Dye-Sensitized Solar Cells by Modify Titanium Dioxide Formation on Supercritical Carbon Dioxide Fluid Synchronous Dyeing

Improvement of efficiency of dye-sensitized solar cells based on analysis of equivalent circuit

Chemically modified titanium oxide nanostructures for dye-sensitized solar cells

Efficiency Boost in Dye-Sensitized Solar Cells by Post- Annealing UV-Ozone Treatment of TiO2 Mesoporous Layer

Influence of TiO2/electrode Interface on Electron Transport Properties in Back Contact Dye-Sensitized Solar Cells

Rational Design Of A Tripartite-Layered Tio2 Photoelectrode: A Candidate For Enhanced Power Conversion Efficiency In Dye Sensitized Solar Cells

Enhanced Efficiency for Dye-Sensitized Solar Cells Using A Surface-Treated Photo-Anode

Improved photovoltaic performance of dye-sensitized solar cells (DSSCs) by Zn + Mg co-doped TiO2 electrode

A Simple and Efficient Method Using Polymer Dispersion to Prepare Controllable Nanoporous TiO2 Anodes for Dye-Sensitized Solar Cells

Strategy to Improve the Performance of Dye-sensitized Solar Cells Based on TiO 2 Films Prepared by Room Temperature Cold Spray

Significant Influence of TiO2 Photoelectrode Morphology on the Energy Conversion Efficiency of N719 Dye-Sensitized Solar Cell

Highly Efficient Dye-Sensitized Solar Cells Composed of Mesoporous Titanium Dioxide

Improved photoelectric conversion efficiency from titanium oxide-coupled tin oxide nanoparticles formed in flame

Performance Improvement of Dye-Sensitized Solar Cell by Optimizing TiO<sub>2</sub>-Photoanode Structure