Abstract:Piezoelectric structures have been used in a variety of applications ranging from vibration control and sensing to morphing and energy harvesting. In order to employ the effective 33-mode of piezoelectricity, interdigitated electrodes have been used in the design of macro-fiber composites which employ piezoelectric fibers with rectangular cross section. In this article, we present an investigation of the two-way electroelastic coupling (in the sense of direct and converse piezoelectric effects) in bimorph cantilevers that employ interdigitated electrodes for 33-mode operation. A distributed-parameter electroelastic modeling framework is developed for the elastodynamic scenarios of piezoelectric power generation and dynamic actuation. Mixing rules (i.e. rule of mixtures) formulation is employed to evaluate the equivalent and homogenized properties of macro-fiber composite structures. The electroelastic and dielectric properties of a representative volume element (piezoelectric fiber and epoxy matrix) between two neighboring interdigitated electrodes are then coupled with the global electro-elastodynamics based on the Euler–Bernoulli kinematics accounting for two-way electromechanical coupling. Various macro-fiber composite bimorph cantilevers with different widths are tested for resonant dynamic actuation and power generation with resistive shunt damping. Excellent agreement is reported between the measured electroelastic frequency response and predictions of the analytical framework that bridges the continuum electro-elastodynamics and mixing rules formulation.

Aspect Ratio Dependence of Electromechanical Coupling Coefficient of Piezoelectric Resonators

Experimental Technique for Characterizing Arbitrary Aspect Ratio Piezoelectric Resonators

Electromechanical Coupling Coefficient of an Ultrasonic Array Element

Electromechanical Coupling Coefficient Of 0.70pb(Mg1/3nb2/3)O-3-0.30pbtio(3) Single Crystal Resonator With Arbitrary Aspect Ratio

Electromechanical Coupling Coefficient K(31)(Eff) For Arbitrary Aspect Ratio Resonators Made Of [001] And [011] Poled (1-X)Pb(Mg1/3nb2/3)O-3-Xpbtio(3) Single Crystals

Research of Coupling Coefficient Extraction of a Cavity Resonator

Electromechanical coupling coefficient k31eff for arbitrary aspect ratio resonators made of [001] and [011] poled (1-x)Pb(Mg(13)Nb(23))O(3)-xPbTiO(3) single crystals.

Effect of kerf filler on the electromechanical coupling coefficient of 1–3 piezoelectric composites

Effect of Kerf Filler on the Electromechanical Coupling Coefficient of an Ultrasonic Transducer Array Element

The electromechanical coupling property and vibration behavior in 1-3 type piezoelectric composites

Near-ideal electromechanical coupling in textured piezoelectric ceramics

Extraction of electromechanical coupling coefficient of piezoelectric thin films deposited on substrates

Effects of physical and geometrical parameters on electromechanical coupling characteristics of a cantilevered piezoelectric vibrator

Characterization of Piezoelectric Materials with Large Piezoelectric and Electromechanical Coupling Coefficients.

Energy Integration Method for Calculating Keff and Its Application in Design Optimization of Disk Resonators Via Convex Edge

Coupling of experimentally validated electroelastic dynamics and mixing rules formulation for macro-fiber composite piezoelectric structures

Analysis of Longitudinal and Torsional Resonance Vibrations of a Piezoelectrically Excited Bar by Introducing Piezoelectric Loss Coefficients

Temperature dependence of the mode coupling effect in a piezoelectric vibrator made of[001]c-poled Mn-doped 0.24PIN-0.46PMN-0.30PT ternary single crystals with a high electromechanical coupling factor

Temperature dependence of mode coupling effect in piezoelectric vibrator made of [001]c-poled Mn-doped 0.24PIN–0.46PMN–0.30PT ternary single crystals with high electromechanical coupling factor

A Coupled Analysis of the Piezoresponse Force Microscopy Signals

Temperature dependence of mode coupling effect in piezoelectric vibrator made of [001]<sub>c</sub>-poled Mn-doped 0.24PIN–0.46PMN–0.30PT ternary single crystals with high electromechanical coupling factor*