Effects of physical and geometrical parameters on electromechanical coupling characteristics of a cantilevered piezoelectric vibrator

Zheng LIN,Yong-liang ZHANG

DOI: https://doi.org/10.13465/j.cnki.jvs.2015.17.025

2015-01-01

Abstract:Here, the effects of physical and geometrical parameters on the electromechanical coupling characteristics of a one-step cantilevered piezoelectric energy harvester were studied.The model equation governing vibration of a piezoelectric vibrator was derived based on Euler-Bernoulli beam assumption in the linear and elastic range, and validated through comparison of theoretical results with experimental ones.Results revealed that the impedance matching leads to the maximum mechanical to electrical energy transfer efficiency;the optimal energy transfer efficiency increases with increase in the electromechanical coupling coefficient under a constant air and structural damping;the coupling coefficient is proportional to the material electromechanical coupling factor;and the coupling coefficient increases with increase in the modulus ratio between piezoelectric structure and base plate;the effect of piezoelectrics structure to base plate density ratio on the coupling coefficient is relatively smaller;with increase in length and thickness ratios between them,the coupling coefficient increases initially then decreases;there are the optimal length ratio and the optimal thickness ratio,they make the coupling coefficient reach the maximum;the optimal length ratio has a variation range of 0.6~0.7;the modulus ratio has an obvious effect on the optimal thickness ratio,the latter decreases with increase in the former.The study results provided a guidance for design of piezoelectric vibrators.