Abstract:This paper presents the results of the performance of piezoelectric cantilever beams in relation to their size. The total produced power represents the main indicator of performance of a piezoelectric harvesting system while the area of the beams stays constant. Lightweight design is an important aspect in any industry, mainly in the aerospace. In this study, the effects of non-uniformity on the efficiency and power output are studied. Finite element method (FEM) with the application of superconvergent element (SCE) is adopted here to solve the equations. It is observed that the trapezoidal geometry (converging beam) provides a higher output power while the efficiency decreases. Moreover, in order to prove that the power enhancement is achievable while the amount of piezoelectric material consumed is constant the new configuration is proposed. In the configuration, an array of uniform beams connected in series is used instead of one single rectangular beam. The proposed setting generates an output power of 1.817 mW at a resonant frequency of 284.6 Hz when excited by an input acceleration of 1 g. The only challenge is the fundamental frequency difference which is met with the application of proof mass and thinner substrate and piezoelectric layers.Abbreviations: at: Generalized coordinates vector; Ap: The electrode area; A: The amplitude vector of generalized coordinates; bx: Width; b0: Initial width; C: Damping matrix; Cp: Capacitance of the one piezoelectric layer; Cˉp: Effective (equivalent) capacitance of the piezoelectric layers; d31: Piezoelectric strain coefficient; D3: The electric displacement; E: Young's modulus; E3: The electrical field along the thickness direction; F: Dynamic force vector; gt: The translation part of base motion; G: Shear modulus; hp: Piezoelectric layers' thickness; h0: Initial thickness of substrate layer; i: Imaginary number; It: Current output; ks: Shear correction factor; K: Global stiffness matrix; L: Length of the beam; le: The length of one element; M: Global mass matrix; n: Polynomial's degree; Nw,Nϕ: Matrices of shape functions (1×4 for one element); Pin: The input mechanical power; Pout: The output electrical power; Qt: Electric charge output; R: Displacement vectors of the generic point S (3×1); Rl: External load resistance; R˙: Velocity vector of the generic point S (3×1); t: Time; T: Kinetic energy; u: Axial displacement; U: Potential energy; v,w: Transversal displacements; V: Volume; vt: The generated piezoelectric voltage v0, w0: Displacements on the middle-plane; x, y, z: Positi -Abstract Truncated-

Performance enhancement of cantilever piezoelectric energy harvesters by sizing analysis

Design and Optimization of Piezoelectric Cantilever Beam Vibration Energy Harvester

Optimization of cantilever piezoelectric harvester to triangular shape with material reduction using finite element analysis

Effect of single-side stroke limiter on cantilever-based piezoelectric energy harvesting from low frequency vibrations

Architecture Design of High‐Performance Piezoelectric Energy Harvester with 3D Metastructure Substrate

Optimizing Power Density in Partially Coated Cantilever Beam Energy Harvesters: A Cost-Effective Design Strategy

Size Optimization of Conical Piezoelectric Energy Harvester

Fabrication and Optimal Design of a Mechanical Piezoelectric Energy Harvester with Re-entrant Honeycomb Substrate for Maximizing Voltage Output

Design, Manufacture and Test of Piezoelectric Cantilever-Beam Energy Harvesters with Hollow Structures

Performance Analysis of Piezoelectric Multi-cantilever Array System with Different Mass Configurations

A piezoelectric cantilever-beam energy harvester (PCEH) with a rectangular hole in the metal substrate

A piezoelectric energy harvester with parallel connection using beams of different lengths to improve output performance

Architecture Design of High‐Performance Piezoelectric Energy Harvester with 3D Metastructure Substrate (Adv. Theory Simul. 10/2024)

Energy harvesting from vibrations of a beam under moving mass using auxetic cantilever beams: Theoretical and experimental investigations

Influence of effective electrode coverage on the energy harvesting performance of piezoelectric cantilevers

Cantilever configurations in vibration-based piezoelectric energy harvesting: A comprehensive review on beam shapes and multi-beam formations.

Design Optimization of PVDF-based Piezoelectric Energy Harvesters

Performance Analysis of Low-Frequency Piezoelectric Energy Harvesting Systems with Multiple Nonlinear Factors and Bidirectional Excitations

Uniform Stress Distribution of Bimorph by Arc Mechanical Stopper for Maximum Piezoelectric Vibration Energy Harvesting

Experimental and analytical parametric study of single-crystal unimorph beams for vibration energy harvesting

A novel floating piezoelectric energy harvesting from water waves: fully-coupled simulation