Abstract:In the present study, we analyse the mechanical structure for the two-stage anvil cell, and design the two-stage high pressure cell using diamond-cemented carbide compound as anvil-material. The diamond-cemented carbide compound material is synthesized using the 6 × 2500 ton cubic press in our laboratory. We sinter diamond/Co layer (Φ30 mm×10 mm) on a WC-cobalt substrate (Φ30 mm×13 mm) at high pressures and temperatures, then, we obtain the cubic anvils from the sintered cylindrical chunks by wire-electrode cutting. The diamond-cemented carbide compound anvil has three advantages over the traditional sintered diamond anvil:first, a scaled-up version of the sintered diamond anvil could be obtained by sintering the diamond/Co layer on a WC-cobalt substrate;second, the diamond-cemented carbide compound anvil is machined easily compared with the sintered diamond anvil;and third, the experimental cost using the diamond-cemented carbide compound anvils is much lower than using the sintered diamond anvil. Using the diamond-cemented carbide compound anvil, we design the two-stage 5.5/1.5 (octahedral edge-length/anvil truncation edge-length, in millimetre) assemble. Pressure calibration at room temperature is performed for the 5.5/1.5 assemble using the phase transitions of Zr (α-ω, 7.96 GPa;ω-β, 34.5 GPa) under high pressures. The pressure range of the two-stage apparatus besed on hinge-type cubic press is extended from 20 GPa to about 35 GPa using the 5.5/1.5 assemble. The pressure calibration for the two-stage apparatus using diamond-cemented carbide compound anvil is ongoing in our laboratory. We believe that the pressures above 50 GPa could be achieved using these anvils.

Generation Of Ultrahigh Pressure Using Single-Crystal Chemical-Vapor-Deposition Diamond Anvils

Calibration of Pressure to 35 Gpa for the Cubic Press Using the Diamond-Cemented Carbide Compound Anvil

Synthesis of Novel Superhard Materials under Ultrahigh Pressure

Synthesis of Nano-Polycrystalline Diamond under High Pressure and High Temperature

Composite Chemical Vapor Deposition Diamond Anvils for High-Pressure/high-temperature Experiments

Two stage 6-8 Type Large Cavity Static High Pressure Device Based on the Domestic Cubic Press

Two-dimensional Energy Dispersive X-Ray Diffraction at High Pressures and Temperatures

Diamond Anvil Cell Behavior Up to 4 Mbar

In situ synchrotron X-ray diffraction with laser-heated diamond anvil cells study of Pt up to 95 GPa and 3150 K

Ultrahigh-pressure Experiment with a Motor-Driven Diamond Anvil Cell.

Large-volume Cubic Press Produces High Temperatures above 4000 Kelvin for Study of the Refractory Materials at Pressures.

Energy dispersive x-ray diffraction of micro-crystals at ultrahigh pressures

X-Ray Imaging Of Stress And Strain Of Diamond, Iron, And Tungsten At Megabar Pressures

Extreme static compression of carbon to terapascal pressures

New Methods for Investigating Superconductivity at Very High Pressures

Shear driven formation of nano-diamonds at sub-gigapascals and 300 K

Progress in Cryocrystals at Megabar Pressures

Enhanced Growth Of High Quality Single Crystal Diamond By Microwave Plasma Assisted Chemical Vapor Deposition At High Gas Pressures

Ultrahard diamond single crystals from chemical vapor deposition

Rapid Growth of Nanocrystalline Diamond on Single Crystal Diamond for Studies on Materials under Extreme Conditions

Nano-Diamond Compressibility at Pressures Up to 85 GPa