Abstract:We introduce a new mechanism to pump liquid in microchannels based on the directional growth and displacement of gas bubbles in conjunction with the non-directional and selective removal of the bubbles. A majority of the existing bubble-driven micropumps employs boiling despite the unfavorable scaling of energy consumption for miniaturization because the vapor bubbles can be easily removed by condensation. Other gas generation methods are rarely suitable for micropumping applications because it is difficult to remove the gas bubbles promptly from a pump loop. In order to eradicate this limitation, the rapid removal of insoluble gas bubbles without liquid leakage is achieved with hydrophobic nanopores, allowing the use of virtually any kind of bubbles. In this paper, electrolysis and gas injection are demonstrated as two distinctively different gas sources. The proposed mechanism is first proved by circulating water in a looped microchannel. Using H(2) and O(2) gas bubbles continuously generated by electrolysis, a prototype device with a looped channel shows a volumetric flow rate of 4.5-13.5 nL s(-1) with a direct current (DC) power input of 2-85 mW. A similar device with an open-ended microchannel gives a maximum flow rate of approximately 65 nL s(-1) and a maximum pressure head of approximately 195 Pa with 14 mW input. The electrolytic-bubble-driven micropump operates with a 10-100 times higher power efficiency than its thermal-bubble-driven counterparts and exhibits better controllability. The pumping mechanism is then implemented by injecting nitrogen gas bubbles to demonstrate the flexibility of bubble sources, which would allow one to choose them for specific needs (e.g., energy efficiency, thermal sensitivity, biocompatibility, and adjustable flow rate), making the proposed mechanism attractive for many applications including micro total analysis systems (microTAS) and micro fuel cells.

Production of Monodispersed Micron-Sized Bubbles at High Rates in A Microfluidic Device

A New Device for the Generation of Microbubbles

High-Speed Generation of Microbubbles with Constant Cumulative Production in a Glass Capillary Microfluidic Bubble Generator

Leveraging 3D Printing for the Design of High-Performance Venturi Microbubble Generators

Structural Design and Performance of a Jet-Impinging Type Microbubble Generator

A Capillary-Assembled Micro-Device for Monodispersed Small Bubble and Droplet Generation

Bubble Generation in a 3-D Flow-Focusing Microchannel: from Squeezing to Jetting

Controllable Gas-Liquid Phase Flow Patterns And Monodisperse Microbubbles In A Microfluidic T-Junction Device

High‐frequency Formation of Bubble with Short Length in a Capillary Embedded Step T‐junction Microdevice

Feedback-controlled microbubble generator producing one million monodisperse bubbles per second

Formation of Monodisperse Microbubbles in a Microfluidic Device

High throughput microfluidic nanobubble generation by microporous membrane integration and controlled bubble shrinkage

Aging of the respiratory system

A Microdevice for Producing Monodispersed Droplets under A Jetting Flow

Generation of Micromonodispersed Droplets and Bubbles in the Capillary Embedded T‐junction Microfluidic Devices

Geometric Effect on Gas–Liquid Bubbly Flow in Capillary-Embedded T-Junction Microchannels

Mass Production of Monodisperse Ultrasound Contrast Microbubbles in Integrated Microfluidic Devices

Dynamics of Bubble Formation in Highly Viscous Liquid in Co-Flowing Microfluidic Device

Synthesis of scalable microdroplets with fluid instability of shearing flow in microfluidics

Bubbling Behaviors Induced by Gas-Liquid Mixture Permeating Through A Porous Medium

Micropumping of liquid by directional growth and selective venting of gas bubbles