Abstract:In our previous work, a new flow route was developed-a so-called perpendicular shear force-induced droplet formation-in a self-designed simple T-junction microchannel device. In this work, the crossflowing rupture technique was used to prepare monodisperse droplets in a similar device and successfully prepared monodisperse droplets ranging from 50 to 500 mu m with polydispersity index (sigma) values of < 2%. Two kinds of flow patterns of plug flow and drop flow in the T-junction microchannels could be formed. By changes in the surfactant concentration, the interfacial tension and the wetting ability varied, and the disordered or ordered two-phase flow patterns could be controlled. Evolutions of the contact angle of the oil in contact with the wall surface were explained by the adsorption of surfactant molecules to the solid-liquid interface. The increase of continuous phase flow rate and viscosity resulted in the decrease of the droplet size, and the droplet size was correlated with capillary number Ca. By comparing the variation range of drop size using the two methods, it was found that the method of perpendicular flow-induced droplet formation can control the drop size over a much wider range. (c) 2006 American Institute of Chemical Engineers.

Generation of Micromonodispersed Droplets and Bubbles in the Capillary Embedded T‐junction Microfluidic Devices

A Capillary-Assembled Micro-Device for Monodispersed Small Bubble and Droplet Generation

Scalable Droplet Generator Design Using Parallel-Arranged Capillaries with Axial Misalignment

The Instability of Monodisperse Bubbles Passing Through a Confined Geometry

Preparation of Highly Monodisperse Droplet in a T‐junction Microfluidic Device

Generation of Monodisperse Micro-Droplets Within the Stable Narrowing Jetting Regime: Effects of Viscosity and Interfacial Tension

Droplet Generation in Micro-Sieve Dispersion Device

Geometric Effect on Gas–Liquid Bubbly Flow in Capillary-Embedded T-Junction Microchannels

A Microdevice for Producing Monodispersed Droplets under A Jetting Flow

Liquid–liquid micro-dispersion in a double-pore T-shaped microfluidic device

Numerical Simulation of Droplet Generation in Cross-Junction Microchannel under Changing Dispersion Phase Velocities

Generation of monodispersed microdroplets by temperature controlled bubble condensation processes.

Taylor Bubble Generation Rules in Liquids with a Higher Viscosity in a T-Junction Microchannel

High‐frequency Formation of Bubble with Short Length in a Capillary Embedded Step T‐junction Microdevice

Generating Gas/Liquid/Liquid Three-Phase Microdispersed Systems in Double T-Junctions Microfluidic Device

Controllable Gas-Liquid Phase Flow Patterns And Monodisperse Microbubbles In A Microfluidic T-Junction Device

A Micro-Capillary Jetting Technology for Liquid-Liquid Microdispersion with Narrow Size Distribution

Synthesis of scalable microdroplets with fluid instability of shearing flow in microfluidics

Manipulation of Microdroplets at a T-junction: Coalescence and Scaling Law

Three-dimensional numerical simulation of a droplet generation in a double T-junction microchannel

Liquid-liquid Colliding Micro-Dispersion and General Scaling Laws in Novel T-junction Microdevices