Abstract:This work introduces a low‐temperature copper doping strategy to enhance the conductivity of atomic layer deposition NiOx (ALD Cu:NiOx) hole‐transporting layers and suppress Ni3+ defects. This strategy improves the performance and scalability of textured perovskite/silicon tandems. As a result, an efficiency of 30.5% for 1‐cm2 tandems (certified 30.3%) and 26.4% for 8.89‐cm2 tandems is achieved. Perovskite tandem solar cells on textured silicon hold potential for surpassing single‐junction limits and industrial compatibility. However, integrating hole‐transporting layers (HTLs) onto textured silicon poses challenges in conformal coating, low‐temperature fabrication, and perovskite solution process compatibility. Here, an atomic layer deposition (ALD) copper‐doping process is introduced to fabricate low‐temperature NiOx HTLs (ALD Cu:NiOx), tailored for textured tandems. Copper‐doping reduces hydroxyl group content and Ni3+ defects, addressing the challenge of enhancing hole conductivity while mitigating recombination loss. This advancement enables to lower the post‐annealing temperature from >300 to 200 °C, achieving compatibility with silicon heterojunction (SHJ) cells and boosting the power‐conversion efficiency (PCE) of 1.65‐eV p–i–n perovskite solar cells to 22.47%. Integrating ALD Cu:NiOx beneath conventional self‐assembled monolayer HTL on textured SHJ leads to notable PCE enhancements, from 28.6% to 30.5% for 1‐cm2 tandems (certified stabilized PCE of 30.04%) and from 23.9% to 26.4% for 8.89‐cm2 tandems. Following 1000 h of maximum‐power‐point (MPP) tracking, tandems maintain 95% of initial efficiency. Notably, losses in open‐circuit voltage and PCE due to area upscaling reduced by over 20%, attributed to ALD Cu:NiOx's ability to enhance perovskite film wettability and minimize shunting on silicon pyramid texture, underscoring its impacts for textured tandem upscaling.

Rectification and Tunneling Effects Enabled by Al2O3 Atomic Layer Deposited on Back Contact of CdTe Solar Cells

Band Alignment for Rectification and Tunneling Effects in Al2O3 Atomic-Layer-Deposited on Back Contact for CdTe Solar Cell.

High-efficiency CdTe-based Thin-Film Solar Cells with Unltrathin CdS:O Window Layer and Processes with Post Annealing

Microstructural Passivation of Patterned Al2O3 Back Contacts on CdS/CdTe Solar Cells

A novel p-type and metallic dual-functional Cu-Al2O3 ultra-thin layer as the back electrode enabling high performance of thin film solar cells

Improved Efficiency and Stability of Organic Solar Cells by Interface Modification Using Atomic Layer Deposition of Ultrathin Aluminum Oxide

Design and Fabrication of PERC-Like CdTe Solar Cells Using Micropatterned Al2O3 Layer

The study on saturation current and ideality factor of CdTe solar cell based on CdS window layer deposited with hydrogen peroxide

Improving the Photovoltaic Performance and Flexibility of Fiber-Shaped Dye-Sensitized Solar Cells with Atomic Layer Deposition

The role of O2 in CdSeTe thin film deposition and CdSeTe/CdTe solar cell performance

Low-temperature Ta-doped TiO x electron-selective contacts for high-performance silicon solar cells

Improving CdTe‐Based Thin‐Film Solar Cell Efficiency with the Oxygenated CdSe Layer Prepared by Sputtering Process

Reduced Recombination Current Due to Sputtered CdO Nanolayer at CdS/CdTe Interface

Enhanced Si Passivation and PERC Solar Cell Efficiency by Atomic Layer Deposited Aluminum Oxide with Two-step Post Annealing

The Application of Al2tio5 at the Tio2/Perovskite Interface to Decrease Carrier Losses in Solar Cells

Impact of ALD-Deposited Ultrathin Nitride Layers on Carrier Lifetimes and Photoluminescence Efficiency in CdTe/MgCdTe Double Heterostructures

Low‐Temperature Atomic Layer Deposition of Hole Transport Layers for Enhanced Performance and Scalability in Textured Perovskite/Silicon Tandem Solar Cells

Constructing tin oxides Interfacial Layer with Gradient Compositions for Efficient Perovskite/Silicon Tandem Solar Cells with Efficiency Exceeding 28%

Enriched Semiconducting Single Wall Nanotubes As Back Contact for CdTe Solar Cell.

Atomic Layer Deposition of Vanadium Oxide as Hole‐Selective Contact for Crystalline Silicon Solar Cells

Improvement of Power Conversion Efficiency of Cu <sub>2</sub>znsn(s,se) <sub>4</sub> Solar Cells by Al Doped CdS