Abstract:Natural fractures are widely distributed in rocks. Generally, there are four types of natural fractures, i.e., single, parallel, intersected and mixed. Uniaxial compression tests on naturally fractured marble samples, taken from the transportation tunnels of Jinpin II hydropower station in southwestern China, are conducted with a MTS815 rock mechanics testing system. The acoustic emission (AE) events are monitored by PCI-II AE system. The spatial evolutions of different natural fractures have been successfully located and tracked according to the AE ringing number. Experimental results indicate that the failure process of fractured marble is locally progressive. The AE event accumulation is strongly related to the loading process and stress redistribution in rock. For the former two types, i.e., single and parallel natural fractures, the spatial AE event distributions in marbles are relatively simpler than those of the other two. The corresponding strong AE event numbers (with ringing number greater than 20) increase with the compressive stress along the naturally fractured surfaces when the stress is low. When the compressive stress is close to the failure strength of the rock, AE events first appear around the natural fracture tip, then spread along the final rupture direction. For the marble containing intersected natural fractures, strong AE events are approximately uniformly distributed at the initial stage of the compression test. Later, the AE events increase when the compressive stress gets higher continuously, and then concentrate around the intersection points of fractures. The case with mixed natural fractures has the most complex AE event distribution than those of the others. However, it is still not difficult to determine the internal weakness parts and stress field based on the spatial AE event distribution. The fractal dimension of the spatial AE event distribution, capable of describing the mechanical behavior and structural damage of rock materials, is estimated by a newly developed analysis method. The parameters of AE events for different types of natural fractures, such as AE accumulative value, amplitude and absolute energy, are statistically analyzed. The present testing scheme can be an initial step toward further development of in situ microseismic monitoring techniques for complex fractures. Moreover, the obtained experimental and analytical results can facilitate the investigation on rock mass failure and instability mechanism.

Fractal and Morphological Characteristics of Single Marble Particle Crushing in Uniaxial Compression Tests

Impact of Particle Shape on Crushing Behaviour of Rock Particles Using X-ray Micro-CT Testing and DEM Modelling

Crushing Strength of Artificial Single-Particle Considering the Effect of Particle Morphology

Fractal Pattern of Particle Crushing of Granular Geomaterials during One-Dimensional Compression

Fractal Crushing of Solid Particles

Modeling particle breakage of rockfill materials based on single particle strength

Single-particle Crushing Test and Numerical Simulation of Coarse Grained Soil Based on Size Effect

A new method for characterizing particle crushing state of granular materials based on linear fitting

PFC2D BASED FRACTAL MODEL FOR TENSILE STRENGTH AND BREAKAGE ENERGY OF ROCK PARTICLE CRUSHING

SIZE EFFECT ON CRUSHING OF ROCK PARTICLES

The process and mechanism for the contact breakage of marble particles

Fracture Evolution and Energy Characteristics During Marble Failure Under Triaxial Fatigue Cyclic and Confining Pressure Unloading (FC-CPU) Conditions

Effects of Particle Size on Crushing and Deformation Behaviors of Rockfill Materials

Fractal characteristics of rocks and mesoscopic fractures at different loading rates

Discrete Numerical Modeling of Granular Materials Considering Crushability

Crack Propagation and Scale Effect of Random Fractured Rock under Compression-Shear Loading

Numerical investigation on the mechanical and fracture behaviors of marble under cyclic loading and unloading true triaxial compression using discrete element method

Fractal Crushing of Granular Materials under Confined Compression at Different Strain Rates

Spatial Evolution and Fractal Characteristics of Natural Fractures in Marbles under Uniaxial Compression Loading Based on the Source Location Technology of Acoustic Emission

Discrete element simulation of effects of multicontact loading on single particle crushing

A Micromechanical Analysis of Marble Pulverization under Quasi-Static Progressive Cyclic Loading