Abstract:A microwave power-combining technique based on magnetrons has been widely researched to solve the urgent demands for high-power, low-cost microwave sources in microwave industrial applications. To achieve high resultant efficiency, conventionally, injection locking with static frequency is utilized to drag the output frequency of each magnetron source to the exact same frequency, and a phase shifter is required to adjust the output phase of each combining source. In this article, we propose a novel phase shifterless microwave power system with two magnetrons utilizing a frequency-searching injection-locking technique. Coaxial cables with different physical lengths are used to realize phase adjustment under different injection frequencies. By sweeping the injection frequency in a small band, the phase difference between combining signals can be adjusted. Thus, high resultant efficiency can be obtained. When the injection frequency is swept, the phase difference between the output and injection signals has been analyzed theoretically, the phase difference between the different-length coaxial injection cables has also been analyzed. Furthermore, the relationship between the sweeping frequency bandwidth and requirements of the minimum length difference of the coaxial injection cables has been derived and analyzed. Experimental results show that a high resultant efficiency of 94.6% can be obtained with the proposed phase shifterless system. The system could maintain high resultant efficiency even when the free-running frequency and power of one magnetron are changed by adjusting its anode current. The experiments reveal that the proposed method works for different combining sources.

Analysis Of The Injection-Locked Magnetron With A Mismatched Circulator

Injection-Locking of Magnetrons with Matched Impedance

Modeling and Experiments of an Injection-Locked Magnetron With Various Load Reflection Levels

Simple and accurate analytical estimation of slotting effect on magnet loss in fractional-slot surface-mounted PM machines

Analytical Modeling and Analysis of Open-Circuit Magnet Loss in Surface-Mounted Permanent-Magnet Machines

The Interlocking Experiment on Millimeter Wave Coaxial Magnetron for Array Application

Coherent Power Combining of Four-Way Injection-Locked 5.8-GHz Magnetrons Based on a Five-Port Hybrid Waveguide Combiner

Three dimension PIC simulations of A 2.45GHz injection-locked magnetron with sector-and-slot-type resonators

Compact Four-Port Waveguide Circulator Using Discrete Ferrites for Injection-Locking Magnetron System

Theoretical investigation of frequency characteristics of free oscillation and injection-locked magnetrons*

Internal-locking relativistic magnetron in transversely opposed driven scheme

Analysis and Injection Control of Circulating Current for Modular Multilevel Converters

Theoretical Analysis And Simulation Of Resonant System Of High Power Continuous Wave Magnetron

Highly Efficient Microwave Power System of Magnetrons Utilizing Frequency-Searching Injection-Locking Technique With No Phase Shifter

Sweep Frequency Heating based on Injection Locked Magnetron

Switchable and high-efficiency phase-locking of S-band magnetrons with coaxial line

Analysis of an MMI-Based Six-Port Circulator by Using 3-D Magneto-Optical Beam Propagation Method

ERROR ANALYSIS AND CORRECTION SCHEME IN C-ADS INJECTOR-I*

Error analysis and lattice improvement for the C-ADS Injector- I

Multiorder-Cascaded Matching of Coupling Structures for High-Efficiency Phase Locking Between Multiple Magnetrons

Design and Analysis of a Diode Magnetron Injection Gun for a G-Band Gyro-TWT