Abstract:We reported a low-temperature solution-processed method for the fabrication of AlOx thin films in the memory device. The detailed study is carried out to figure out the effect of varying annealing temperatures (150, 200, 250, 300, and 350 degrees C) on resistive switching characteristics of solution-processed aluminum oxide dielectric. The dielectric properties of AlOx films under different annealing temperatures were evaluated by atomic force microscopy (AFM), thermogravimetric analysis-differential scanning calorimetry (TGA-DSC), X-ray diffraction (XRD), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS) firstly. Then the AlOx films were used as the switching dielectric layer for a variety of low-temperature solution-processed oxide resistive random access memory (RRAM) devices. It was found that forming voltage increased with increasing annealing temperature and forming free behavior could be achieved by 200 degrees C sample. No repeatable resistance switching characteristics were observed in the devices with minimum (150 degrees C) and maximum (350 degrees C) annealing temperatures. Compared with the ALD-derived AlOx based RRAM devices in previous study, enhanced performance like small forming voltage, large resistance ratio (<180) and narrow resistance and voltage distribution was achieved by the solution-processed AlOx based ones at the optimized low annealing temperatures of 200 to 250 degrees C, which would be applied in the bionic circuit simulated by synapses and neural networks. All three samples (200, 250, and 300 degrees C) obtained switching endurance up to 300 cycles and data retention over 10(4) s. Furthermore, the solution based fabrication method also has the potential in the flexible memory application due to the merit of the low-temperature process.

Highly uniform resistive switching effect in amorphous Bi 2 O 3 thin films fabricated by a low-temperature photochemical solution deposition method

Resistive switching in Nb-doped SrZrO3 memory films: An effective approach with a Cu modulation layer

Bipolar Resistive Switching Effect and Mechanism of Solution-Processed Orthorhombic Bi2SiO5 Thin Films

Excellent resistive switching property and physical mechanism of amorphous TiO 2 thin films fabricated by a low-temperature photochemical solution deposition method

Highly uniform resistive switching properties of amorphous InGaZnO thin films prepared by a low temperature photochemical solution deposition method.

Remarkably Improved Uniform Bipolar-Resistive Switching Performance with a NiO Buffer Layer in Bi2SiO5 Thin-Film Memory Devices

Unipolar Resistive Switching Behavior of Amorphous SrMoO4 Thin Films Deposited at Room Temperature

Deposition of Bi_2O_3 Thin Films and Their Resistive Switching Characteristics

Resistive switching properties of amorphous Sm2Ti2O7 thin film prepared by RF sputtering for RRAM applications

Deposition of Amorphous Zinc Oxide Thin Film at Room Temperature and Its Resistive Switching Characteristics

Resistive switching characteristics of interfacial device based on Bi2Ti2O7 film

Deposition Temperature and Thickness Effect on the Resistive Switching in BiFeO3 Films

Interface-related resistive switching in BiFeO 3 thin films

Epitaxial Brownmillerite Oxide Thin Films for Reliable Switching Memory

Nonpolar Resistive Switching In Mn-Doped Bifeo3 Thin Films By Chemical Solution Deposition

Annealed AlOx Film with Enhanced Performance for Bipolar Resistive Switching Memory

Enhanced Resistive Switching Performance of Aluminum Oxide Dielectric with a Low Temperature Solution-Processed Method

Improved Resistance Switching Characteristics of BiFeO3 Thin Film by Increasing the Annealing Temperature

Unipolar Resistive Switching Effect and Mechanism of Solution-Processed Spinel Co3o4 Thin Films

Unipolar Resistive Switching Behaviors in Amorphous Lutetium Oxide Films

Control of Rectifying and Resistive Switching Behavior in BiFeO3 Thin Films