Abstract:Although significant progress has been made towards using ZnO nanofibers (NFs) in future high-performance and low-cost electronics, they still suffer from insufficient device performance caused by substantial surface roughness (i.e., irregularity) and granular structure of the obtained NFs. Here, a simple one-step electrospinning process (i.e., without hot-press) is presented to obtain controllable ZnO NF networks to achieve high-performance, large-scale, and low-operating-power thin-film transistors. By precisely manipulating annealing temperature during NF fabrication, their crystallinity, grain size distribution, surface morphology, and corresponding device performance can be regulated reliably for enhanced transistor performances. For the optimal annealing temperature of 500 degrees C, the device exhibits impressive electrical characteristics, including a small positive threshold voltage (V-th) of approximate to 0.9 V, a low leakage current of approximate to 10(-12) A, and a superior on/off current ratio of approximate to 10(6), corresponding to one of the best-performed ZnO NF devices reported to date. When high- AlOx thin films are employed as gate dielectrics, the source/drain voltage (V-DS) can be substantially reduced by 10x to a range of only 0-3 V, along with a 10x improvement in mobility to a respectable value of 0.2 cm(2) V-1 s(-1). These results indicate the potential of these nanofibers for use in next-generation low-power devices.

Low-Temperature, All-Inorganic Nanoparticle Solution Process for Zno Nanowire Network Transistor Fabrication on A Polymer Substrate

Synthesis of ZnO Nanowires for Thin Film Network Transistors

Solution-Processed Zinc Oxide Thin-Film Transistors with a Low-Temperature Polymer Passivation Layer

Low-Temperature Sintering of In-Plane Self-Assembled ZnO Nanorods for Solution-Processed High-Performance Thin Film Transistors

Fabrication of Zinc Oxide Thin Film Transistors via Low-Temperature Solution Processing

Zinc Oxide Nanowire Networks for Macroelectronic Devices

Melt-mediated Coalescence of Solution-Deposited ZnO Nanoparticles by Excimer Laser Annealing for Thin-Film Transistor Fabrication

ZnO Nanowire and $\hbox{ws}_{2}$ Nanotube Electronics

Patterned ZnO nanorods network transistor fabricated by low-temperature hydrothermal process

Excimer laser annealing of ZnO nanoparticles for thin film transistor fabrication

All-Solution-Based, Low-to-Room-Temperature Fabrication of Position-Controlled Metal-Nanodot-Decorated Semiconductor Nanorods for Enhanced Optoelectronic Transducers

A Simple and Sufficient Method to Fabricate Zno Nanowire Thin-Film Transistors

Solution-processed Zinc Oxide Field-Effect Transistors Based on Self-Assembly of Colloidal Nanorods.

Facile Route for Low-temperature Eco-friendly Solution Processed ZnSnO Thin-film Transistors

Hydrocarbons‐Driven Crystallization of Polymer Semiconductors for Low‐Temperature Fabrication of High‐Performance Organic Field‐Effect Transistors

Fully Solution-Processed Sodium Doped Zno Thin-Film Transistors Via A Low-Temperature Aqueous Route

Low Temperature Ofet (Organic Field Effect Transistor) Fabrication By Metal Nanoparticle Imprinting

Wafer‐Scale Fabrication of High‐Performance N‐type Polymer Monolayer Transistors Using a Multi‐Level Self‐Assembly Strategy

ZnO Nanofiber Thin‐Film Transistors with Low‐Operating Voltages

Solution Patterning of Ultrafine Ito and Znrh2o4 Nanowire Array below 20 Nm Without Etching Process

Lithography-free High-Resolution Organic Transistor Arrays on Polymer Substrate by Low Energy Selective Laser Ablation of Inkjet-Printed Nanoparticle Film