The determination of hexavalent chromium (Cr6+) in electronic and electrical components and products to comply with RoHS regulations.
L Hua,Y C Chan,Y P Wu,B Y Wu
DOI: https://doi.org/10.1016/j.jhazmat.2008.07.150
IF: 13.6
2009-01-01
Journal of Hazardous Materials
Abstract:Toxicity of hexavalent chromium (Cr6+) was focused on with a publication of EU RoHS directive, a novel method to determine hexavalent chromium is developed. It is a combination of energy dispersion X-ray fluorescence spectrometry (EDXRF), spot test, alkali digestion and UV-vis spectro photometric analysis. First, by EDXRF screening, the presence or absence of element Cr was established. Spot test was followed to identify the valent state of chromium because Cr6+ and Cr3+ normally coexist. After alkali digestion, Cr(VI) was separated without an undersired Cr(VI)-Cr(III) interconversions. With a color reagent (DPC) to chelated with Cr(VI), the solution was finally detected by a UV-vis spectro photometer at a wavelength of 540 nm which is the basis of analyzing Cr(VI) quantitatively. Some parameters affecting analyses were studied. It was found that when pH in the final solution was 2.0, the extraction time was 60 min, the extraction temperature was 90 DC, pH during the extraction process was 7.5-8.5, and a mixed buffer solution (0.5 M K-2 HPO4/0.5 M KH2 PO4) was added up to 1 ml, colorimetric reagent was added to 2 ml, it is optimal for extraction. Under this condition, interferences from Fe3+, Pb2+, Ag+, etc., were overcome. It was also found that the curves are rectilinear in the range of 0-500 mu g l(-1), the correlation coefficient is up to 0.999924, and the recovery rates are more than 85%, the Cr(III)-DPCO complex can be kept stable for 24h with a relative humidity (RH) range of 60-90%, and a temperature range of 5-40 degrees C. So it can be concluded that the proposed method has a good sensitivity and high precision. It is a more convincing and reliable method due to its relative standard deviation (R.S.D.) <1% after six replicate determinations of Cr(VI) in an Fe-Ni alloy sample. (C) 2008 Published by Elsevier B.V.