Abstract:In this letter, an E-plane substrate is inserted into the W-band standard waveguide to construct a bandpass filter (BPF) with high selectivity. This E-plane waveguide BPF with three transmission zeroes (TZs) is developed by using a novel compact beeline resonant cell (CBRC) and uniform-impedance resonant cells (UIRCs). It is shown that the locations of the TZs can be designed. Three TZs, with two located in the upper stopband, and the other one located in the lower stopband, are produced by a novel CBRC and two UIRCs, respectively. For verification, the BPF prototype is designed, fabricated and measured, whose total length is just 3.21 mm, namely, less than 0.83 λg (λg is the waveguide wavelength at the center frequency). Moreover, the minimum insertion loss (IL) is only 1.02 dB, and the measured return loss (RL) of the proposed BPF is greater than 14 dB at the frequency range of 94 to 99.3 GHz. The 3-dB fractional bandwidth (FBW) is 6.5%, which is from 93.6 to 99.9 GHz. Good agreement between the simulations and measurements validates the design method. The proposed W-band E-plane waveguide BPF and the efficient design method used in their design are believed to be of importance for future filter device applications in millimeter wave systems.

Design of a SIW balun bandpass filter with high selectivity

Design of a Substrate Integrated Waveguide Balun Filter Based on Three-Port Coupled-Resonator Circuit Model

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

Substrate-Integrated Waveguide Bandpass Filters with Planar Resonators for System-on-Package

An Extended Doublet Substrate Integrated Waveguide (SIW) Bandpass Filter with a Complementary Split Ring Resonator (CSRR)

Compact Dual‐layer Substrate‐integrated Waveguide Bandpass Filters with Controllable Transmission Zeros

Design of Substrate Integrated Waveguide Transversal Filter With High Selectivity

Design of W-band Fin-Line Bandpass Filter with Broadband and Low-Insertion Loss Performance

A Compact and Broadband Balun Based on Multilayer SIW

A Wideband Filtering Balun Using CPW-to-slotline Transitions

Compact half-mode SIW bandpass filter with high-frequency selectivity

Compact Bandpass Filter with High Selectivity Using Quarter-Mode Substrate Integrated Waveguide and Coplanar Waveguide

High selectivity and common-mode suppression balanced bandpass filter with TM dual-mode SIW cavity

Broadband Balanced Filter with High Common-Mode Suppression and Wide Stopband Based on SIW and SSPP

Compact Dual-Band Dual-Mode SIW Balanced BPF With Intrinsic Common-Mode Suppression

Compact W-band E-plane Waveguide Filter with High Selectivity

High common‐mode rejection balanced bandpass filter using novel coupling scheme and source‐loaded coupling technique

Bandpass Filter Based on Spoof Surface Plasmon Polaritons With a Switchable High-Selectivity Notch Band

A Three-Pole Substrate Integrated Waveguide Bandpass Filter Using New Coupling Scheme

High-Selectivity Balanced Bandpass Filter with Mixed Electric and Magnetic Coupling

A compact bandpass filter based on substrate integrated waveguide and spoof surface plasmon polaritons for millimeter-wave applications