Abstract:The carbon partitioning and lengthening rate of bainitic ferrite ( α b ) are excellent experimental parameters to estimate our level of understanding of the mechanism of bainitic transformation from a continuum perspective and our ability to capture it in analytical expressions. For Fe-C alloys and relatively simple steels the classical Zener-Hillert theory captures the bainitic transformation rather well but mispredicts the level of carbon in solution in the bainite and overestimates the lengthening rates for transformations at lower temperatures. To address this issue, this paper presents a new thermo-kinetic model based on the Zener-Hillert theory and the Gibbs energy balance concept to simulate the lengthening behavior of α b in the Fe-C and low alloyed steels. The model incorporates the effect of the temperature dependent carbon diffusion within the migrating interface via a temperature dependent ferrite/austenite interfacial energy and a temperature dependent diffusion coefficient but does not impose local equilibrium across the interface. The good agreement between the model predictions and nine sets of published experiments indicates that both the carbon supersaturation in α b and the slower lengthening rate are caused by carbon diffusion within the migrating interface. It is found that the degree of carbon supersaturation in α b increases significantly with decreasing temperature. Consequently, the enhanced carbon solute drag effect, resulting from carbon diffusion within the interface, strongly retards the lengthening rates of α b at lower temperatures. Transformation strain is shown to have a modest effect on the lengthening rates but to lower the degree of carbon supersaturation.

On the Transition Between Grain Boundary Ferrite and Bainitic Ferrite in Fe–C–Mo and Fe–C–Mn Alloys: the Bay Formation Explained

Analysis of Transformation Stasis During the Isothermal Bainitic Ferrite Formation in Fe–C–Mn and Fe–C–Mn–Si Alloys

Predicting the Transition Between Upper and Lower Bainite Via a Gibbs Energy Balance Approach

The Effect of Interfacial Element Partitioning on Ferrite and Bainite Formation

A general mixed-mode model for the austenite-to-ferrite transformation kinetics in Fe–C–M alloys

Effect of Mo Addition on the Transformation Stasis Phenomenon During the Isothermal Formation of Bainitic Ferrite

Predicting the Effect of Mo, Ni, and Si on the Bainitic Stasis

A Detailed Study of the Transformation Stasis Phenomenon during the Isothermal Bainite Transformation in Mn Based Low Alloy Steels

A 2D Analysis of the Competition Between the Equiaxed Ferritic and the Bainitic Morphology Based on a Gibbs Energy Balance Approach

A Rationalization of Sympathetic Nucleation-Ledgewise Growth Theory of Bainite Transformation in Fe-C Alloys

A New Kinetic Mode During the Austenite-to-Ferrite Transformation in Fe–Mn and Fe–Mn–Mo Alloys

A New Kinetic Mode During the Austenite - to-Ferrite Transformation in Fe–Mn and Fe–Mn–Mo Alloys

Carbon solute drag effect on the growth of carbon supersaturated bainitic ferrite: Modeling and experimental validations

Transition Between Alloy–element Partitioned and Non-Partitioned Growth of Austenite from a Ferrite and Cementite Mixture in a High-Carbon Low-Alloy Steel

Frustrated metastable-to-equilibrium grain boundary structural transition in NbMoTaW due to segregation and chemical complexity

Determination of the Intrinsic Α/γ Interface Mobility During Massive Transformations in Interstitial Free Fe-X Alloys

Application of interrupted cooling experiments to study the mechanism of bainitic ferrite formation in steels

Grain boundary diffusion in a compositionally complex alloy: Interplay of segregation, precipitation and interface structures in a Ni–Cr–Mo alloy

Analysis of the interaction between moving α/γ interfaces and interphase precipitated carbides during cyclic phase transformations in a Nb-containing Fe-C-Mn alloy

Grain boundary diffusion in CoCrFeMnNi high entropy alloy: kinetic hints towards a phase decomposition