Abstract:Fiber optic Fabry-Perot interferometer is inherently suitable as the ultrasonic transducer for photoacoustic tomography due to its high sensitivity, broad bandwidth and small footprint. Interrogated by a narrow linewidth continuous wave laser, the sensor’s output power is modulated by the incident ultrasound. During the imaging process, the sensor’s sensitivity is maximized by locking the laser to a spectral point where the sensor’s reflectivity changes most rapidly with wavelength. Traditionally, one needs a fast tunable laser to scan the reflection spectrum of the sensor and subsequently lock the laser frequency to the proper spectral point using a feedback loop. The requirement of a wavelength-tunable, low-noise interrogation laser significantly raises system cost and inhibits parallel detection. In this paper, we present a fiber optic Fabry-Perot acoustic sensor whose reflection spectrum can be swiftly and robustly tuned using an economical visible diode laser. By controlling the power of the illumination laser, the temperature of the sensor cavity can be finely adjusted which leads to altered cavity length and shifted spectrum. With this technique, we are able to tune the spectrum by more than 10 nm with a precision less than 0.1 nm. The sensor was characterized to exhibit a flat frequency response up to 20 MHz and a noise-equivalent pressure below 200 Pa. This sensor can be batch-fabricated and its low cost and easy implementation make parallel detection feasible and affordable, potentially benefiting fast image acquisition. The performance of the sensor was demonstrated in multiple phantom and in vivo imaging experiments.

Characteristics of a Fiber-Optical Fabry–Perot Interferometric Acoustic Sensor Based on an Improved Phase-Generated Carrier-Demodulation Mechanism

Coherent OTDR Based Ultra-High Sensitive Acoustic Sensor Assisted with Distributed Microstructured Optical Fiber(DMOF) and Hollow Cylinder Transducer

High Sensitivity and High Stability Dual Fabry-Perot Interferometric Fiber-Optic Acoustic Sensor Based on Sandwich-Structure Composite Diaphragm

Diaphragm Based Long Cavity Fabry–Perot Fiber Acoustic Sensor Using Phase Generated Carrier

Sensitivity-enhanced Optical Sensor Based on Multilayer Coated Fabry–Pérot Interferometer

Diaphragm-type Fiber-Optic Interferometric Acoustic Sensor

An Optical Acoustic Detection System Based on Fabry Pérot Etalon Stability Structure

Fiber Acoustic Sensor with Stable Operating-Point Based on a Photo-Thermal Cavity

An Acoustic Sensor Based on Active Fiber Fabry-Pérot Microcavities

An Optical Fiber Hydrophone Using Equivalent Phase Shift Fiber Bragg Grating for Underwater Acoustic Measurement

Photothermally Tunable Fabry-Pérot Fiber Interferometer for Photoacoustic Mesoscopy.

Tunable high-finesse fiber optic Fabry-Perot interferometer for photoacoustic tomography (Conference Presentation)

Sensitivity Characteristics of Microfiber Fabry-Perot Interferometric Photoacoustic Sensors

An Optical Orthogonal Heterodyne Demodulation Technology for Interferometric Fiber-optic Sensor

Anti-wave demodulation method for acousto-optic coupling fiber hydrophones on the water surface

Pressure and Temperature Sensor Based on Fiber-Optic Fabry-Perot Interferometer by Phase Demodulation

Stabilization of optical Fabry–Perot sensor by active feedback control of diode laser

A fiber-optic Fabry-Perot acoustic sensor based on PDMS diaphragm

High-Sensitivity EFPI-Based Acoustic Sensor Using in-Fiber Collimator and Adjustable 45° Mirror

High-Stability Polarization-Based Interrogation Method With Cross-Correlation for Optical Fiber Interferometric Acoustic Sensors

High-sensitivity fiber-optic low-frequency acoustic detector based on cross-correlation demodulation