Abstract:The acoustic black hole (ABH) has been proved to reduce broadband vibration response in beams and plates. While the traditional analytical and semi-analytical methods can only deal with the response of simple ABH structures; for complex ABH structures, the numerical methods such as the finite element method (FEM) have to be resorted and these methods are too often time-consuming. In this work, the vibration isolation by a beam structure embedded with periodic embedded symmetric ABHs is investigated. The vibration transmission of a single embedded symmetric ABH beam unit is first studied by the Riccati transfer matrix method (RTMM). A comparative analysis of the convergence speed and the computation efficiency of the unit by the RTMM and the FEM demonstrates the computation time using the RTMM increases linearly with the number of segments while that using the FEM increases exponentially and quickly exceeds the former as the number of segments increases. The computation time is consistent with the computational complexity associated with their respective algorithms. A hybrid dynamics method (HDM) is then proposed to derive for the vibration transmission solution of the beam with single and multiple periodically embedded symmetric ABHs. A comparison of the responses with those calculated by the RTMM demonstrates that the proposed HDM provides an efficient tool for solving the vibration response of the finite beam with periodic embedded ABHs, leading to much improved computational efficiency with ensured numerical stability and accuracy. This advantage in computation efficiency becomes even more obvious for larger structures when the number of the ABH units increased considerably. The proposed hybrid dynamic approach provides a basis for solving the vibration transmission/isolation problems of more complex ABH structures.

Vibration control of base system using distributed dynamic vibration absorbers

On the Analysis of A Piecewise Nonlinear-Linear Vibration Isolator with High-Static-Low-Dynamic-Stiffness under Base Excitation

Modeling of the bio-inspired vibration isolation platform supported by X-structures via D'Alembert's principle of virtual power

Vibration Isolation by a Periodic Beam with Embedded Acoustic Black Holes Based on a Hybrid Dynamics Method

A DVA-Beam Element for Dynamic Simulation of DVA-Beam System: Modeling, Validation and Application

Vibration Transmission Control of a Flexible Shaft-Bearing System Using Active/passive Support

Eddy Current Vibration Absorber Design and Experiments

Active/passive vibration isolation with multi-axis transmission control: Analysis and experiment

Dynamic Reduction Modeling and Time Delay for an Active Vibration Isolation System with Flexible Base

VIBRATION ANALYSIS OF BASE-ISOLATED BUILDING NEAR URBAN RAIL TRANSIT

Application of Dynamic Vibration Absorbers in Floating Raft System

Optimizations of distributed dynamic vibration absorbers for suppressing vibrations in plates

Semi-Active Control for A Multi-Dimensional Vibration Isolator with Parallel Mechanism

Analysis on Vibration and Shock Response of a Hybrid Isolation System Using Dynamic Vibration Absorber with Negative Stiffness

Parameters optimization of dynamic vibration absorber based on grounded stiffness, inerter, and amplifying mechanism

Dynamic Vibration Absorbers for Vibration Control Within A Frequency Band

Parameters of vibration isolator on visco-elastic beam

Seismic Base Isolation Analysis for the Control of Structural Nonlinear Vibration

Experimental Investigation of a Base Isolation System Incorporating MR Dampers with the High-Order Single Step Control Algorithm

The Isolation Performance of Vibration Systems with General Velocity-Displacement-dependent Nonlinear Damping under Base Excitation: Numerical and Experimental Study

Simulation And Experiment On A Hybrid Micro-Vibration Isolator