Simulation And Experiment On A Hybrid Micro-Vibration Isolator

Wang Chaoxin,Li Qiaobo,Zhang Zhiyi,Shen Rongying

2015-01-01

Abstract:A hybrid micro-vibration isolator incorporating passive and active elements was proposed to isolate vibration in the frequency range 5-200 Hz. The damping and stiffness of the isolator were determined through theoretical calculation and validated by tests. On the basis of the substructure synthesis method, the vibration model of an experimental setup with such isolators was established to analyze vibration isolation performance. The passive element of the isolator is a metallic bellows with fluid damping while the active element is an electromagnetic actuator and used to suppress periodical vibrations distributed mainly within the low frequency range. Experiments were conducted to verify the performance of the isolator. The results have shown that the passive element of the hybrid isolator has a reasonable amplification factor and a decreasing slope 40 dB/decade and active element is able to achieve 38.31 dB reductions in the amplitude of periodic vibrations. However, further improvement of the isolator is needed to enhance its reduction over a wide band.