Abstract:The soil-water characteristic curve (SWCC) is defined as the relationship between the suction and the water content or degree of saturation. The soil-water characteristics and related mathematical models can be used to model the unsaturated soil properties such as the permeability and the shear strength. Conventionally, only the drying soil-water characteristic curve of soil is determined. In this work, the influences of initial water content, initial dry density, the vertical stress and drying and wetting cycles are examined and discussed in detail. The SWCCs and hysteresis loops of residual soils in Xiamen were obtained by the filter paper method. The results show that the initial water content has negligible effect on SWCCs. The specimen at the wet of optimum moisture content (OMC) has the higher air entry value and the larger hysteresis loop than that of the soil specimen at the dry of OMC. The specimen with OMC lies between them. While, the initial dry density has considerable influence on SWCCs. The specimen at lower initial dry density exhibits smaller air entry value and higher rate of desorption than that of the specimen at higher initial dry density. The size of hysteresis loop decreases as the initial dry density increases. The specimens subjected to different vertical stresses have different SWCCs. The higher the applied load on the specimen, the higher the air entry value, the higher the rate of desorption, the smaller the size of hysteresis loop. In the drying and wetting process, the size of hysteresis loop has been substantially affected by the first drying and wetting cycle. With the increasing of drying and wetting cycle, the air entry value and the size of hysteresis hoop decrease. Since the features of soil-water characteristic of sandy clay are not well defined especially for the residual state of saturation, which desaturates continuously without a distinct break point, the residual suction or residual water content, one of the key parameters in the mathematical models of SWCC, is not well defined. As a result five improved models without the residual water content are proposed to describe the SWCCs of residual soil. The improved Gardner model has been found to be the most suitable model for all SWCCs of the residual sandy clay in Xiamen.

Estimation of Soil Clay Content Using Hygroscopic Water Content at an Arbitrary Humidity

Prediction of clay content from water vapour sorption isotherms considering hysteresis and soil organic matter content

Extending the Integrated Richards Equation Method to New Boundary Conditions: Model Description and Validation

Estimation of soil water content at permanent wilting point using hygroscopic water content

Modified Duncan-Chang Model Considering Physical Properties of Saturated Clays

Calculation of Clay Permeability Using a Rectangular Particle-Water Film Model by the Double-Scale Asymptotic Expansion Method

Estimating soil water retention curves from thermal conductivity measurements: A percolation-based effective-medium approximation

Experiment And Modeling Of Soil-Water Characteristic Curve Of Unsaturated Residual Soil

Evaluation of solute diffusion tortuosity factor models for variously saturated soils

Estimating Hydraulic Conductivity of Naturally Sedimented Clays Using Compression Curves

Horizontal and vertical variation of soil clay content and its controlling factors in China

Identification and Quantification of Soil Water Components in Kaolin by Thermogravimetric and Kinetic Analysis

Derivation of soil water retention curve incorporating electrochemical effects

A Unified Thermo-Mechanical Bounding Surface Model for Saturated Clay and Sand

Numerical simulation of water content dependent undrained shear strength of clays

An unsaturated hydraulic conductivity model based on the capillary bundle model, the Brooks‐Corey model and Waxman‐Smits model

Unified Determination of Relative Molecular Diffusivity and Fluid Permeability for Partially Saturated Cement-Based Materials

Predicting chemical influence on soil water retention curves with models established based on pore structure evolution of compacted clay

Electric Resistance Calculation Model of Clay

Water and Heat Transport in Hilly Red Soil of Southern China: II. Modeling and Simulation.

Water retention of rigid soils from a two-factor model for clay