Abstract:Clay minerals in soils and rocks exhibit large volume change upon interaction with water and this behavior becomes even more complex when the strata are being stressed by the engineering and environmental loads. Therefore, a realistic prediction of the hydro-mechanical behavior of the clay-bearing strata is always a challenge due to their coupled swelling-mechanical response in the cases of geotechnical and geoenvironmental engineering problems, nuclear waste storage in clay-bearing rock repositories, shale gas extraction, and other uses of clay in the manufacturing industry. All the existing behavior models have restricted applications in the engineering and other fields of practice mainly due to the partial consideration of the structure and fabric of clay-bearing strata in the model formulation. In this study, a hydro-mechanical behavior model has been formulated using the parameters acquired from the molecular-level simulations and modeling of the volume change and stress–strain behavior of the clay-bearing structure. The Molecular Mechanics and Molecular Dynamic simulations were performed on the natural structure of the clay-bearing strata formulated using Monte Carlo technique. The mathematical model, developed from the simulation results, can predict the overall hydro-mechanical behavior of clay-bearing strata for all possible combinations of clay minerals, non-clay minerals, salts causing cementation of the soil/rock structure, confining pressures, and the induced strain levels. The developed model has successfully been validated through laboratory and field testing on the clay-bearing strata in both the elastic and elasto-plastic regions of the stress–strain behavior and also from the data of two (02) swelling clays (MX-80 and FEBEX Bentonite) from the existing literature, supporting the universal nature of the developed behavior model.

Numerical simulation of water content dependent undrained shear strength of clays

Thermodynamics-based bounding surface model for overconsolidated clay

Direct Shear Test and Shear Strength Model of Clay-Filled Joints

Experimental Study on Shear Strength Considering Initial Void Ratio and Plasticity Index

Calculation of Clay Permeability Using a Rectangular Particle-Water Film Model by the Double-Scale Asymptotic Expansion Method

A Unified Thermo-Mechanical Bounding Surface Model for Saturated Clay and Sand

Modeling Temperature-Dependent Behavior of Soft Clay

VARIATION OF THE SHEAR STRENGTH OF XIAMEN UNSATURATED RESIDUAL SOILS WITH WATER CONTENT

Finite element modeling of thermo-hydro-mechanical coupled processes in clay soils considering bound water dehydration

Modeling Strain-Rate Dependent Behavior of KR0-Consolidated Soft Clays

Undrained cyclic shear strength and stiffness degradation of overconsolidated soft marine clay in simple shear tests

A Simple Bounding Surface Elasto-Viscoplasticity Model for Marine Clays under Monotonic and Cyclic Loading

COUPLING EFFECTS OF INITIAL SHEAR STRESS AND LOADING RATE ON STRENGTH BEHAVIORS OF SATURATED SOFT CLAY

Energy-based Evaluation of Undrained Cyclic Behavior of Marine Soft Clay under Multidirectional Simple Shear Stress Paths

Modeling Of Stress-Strain Behavior Of Soft Clay Under Cyclic Loading

An Elastic-Viscoplastic Model for Time-Dependent Behavior of Soft Clay and Its Application on Rheological Consolidation

Effects of Initial Shear Stress on Cyclic Behavior of Saturated Soft Clay

A universal hydro-mechanical coupled behavior model for clay-bearing strata—Molecular-level simulation approach

Modified Model for Hydraulic Conductivity of Clayey Soil under Shear

Study of shear properties and shear model of soil-rock mixture

An effective stress-based approach to modeling the chemo-mechanical behavior of saturated active clay