Abstract:OBJECTIVE: As neural interfaces demonstrate success in chronic applications, a novel class of reshaping electrodes with patterned regions of stiffness will enable application to a widening range of anatomical locations. Patterning stiff regions and flexible regions of the electrode enables nerve reshaping while accommodating anatomical constraints of various implant locations ranging from peripheral nerves to spinal and autonomic plexi.APPROACH: Introduced is a new composite electrode enabling patterning of regions of various electrode mechanical properties. The initial demonstration of the composite's capability is the composite flat interface nerve electrode (C-FINE). The C-FINE is constructed from a sandwich of patterned PEEK within layers of pliable silicone. The shape of the PEEK provides a desired pattern of stiffness: stiff across the width of the nerve to reshape the nerve, but flexible along its length to allow for bending with the nerve. This is particularly important in anatomical locations near joints or organs, and in constrained compartments. We tested pressure and volume design constraints in vitro to verify that the C-FINE can attain a safe cuff-to-nerve ratio (CNR) without impeding intraneural blood flow. We measured nerve function as well as nerve and axonal morphology following 3 month implantation of the C-FINE without wires on feline peripheral nerves in anatomically constrained areas near mobile joints and major blood vessels in both the hind and fore limbs.MAIN RESULTS: In vitro inflation tests showed effective CNRs (1.93 ± 0.06) that exceeded the industry safety standard of 1.5 at an internal pressure of 20 mmHg. This is less than the 30 mmHg shown to induce loss of conduction or compromise blood flow. Implanted cats showed no changes in physiology or electrophysiology. Behavioral signs were normal suggesting healthy nerves. Motor nerve conduction velocity and compound motor action potential did not change significantly between implant and explant (p > 0.15 for all measures). Axonal density and myelin sheath thickness was not significantly different within the electrode compared to sections greater than 2 cm proximal to implanted cuffs (p > 0.14 for all measures).SIGNIFICANCE: We present the design and verification of a novel nerve cuff electrode, the C-FINE. Laminar manufacturing processes allow C-FINE stiffness to be configured for specific applications. Here, the central region in the configuration tested is stiff to reshape or conform to the target nerve, while edges are highly flexible to bend along its length. The C-FINE occupies less volume than other NCEs, making it suitable for implantation in highly mobile locations near joints. Design constraints during simulated transient swelling were verified in vitro. Maintenance of nerve health in various challenging anatomical locations (sciatic and median/ulnar nerves) was verified in a chronic feline model in vivo.

Design and Simulation of a Parylene-Based Three-Dimensional Cuff Electrode for Peripheral Nerve Stimulation

Climbing-inspired twining electrodes using shape memory for peripheral nerve stimulation and recording.

Bio-inspired 3D Neural Electrodes for the Peripheral Nerves Stimulation Using Shape Memory Polymers

A cable-tie-type parylene cuff electrode for peripheral nerve interfaces

A Parylene Self-Locking Cuff Electrode for Peripheral Nerve Stimulation and Recording

Self-Closing Stretchable Cuff Electrodes for Peripheral Nerve Stimulation and Electromyographic Signal Recording

Self-Closed Parylene Cuff Electrode for Peripheral Nerve Recording

Soft‐Actuated Cuff Electrodes with Minimal Contact for Bidirectional Peripheral Interfaces

A novel 3D flexible parylene-metal structure fabrication technique

Fabrication of Flexible 3D Microelectrode Aray with Parylene-Based Pattern Transfer Technique

Towards an artificial peripheral nerve: Liquid metal-based fluidic cuff electrodes for long-term nerve stimulation and recording

The design of and chronic tissue response to a composite nerve electrode with patterned stiffness

Design of an adaptable intrafascicular electrode (AIR) for selective nerve stimulation by model-based optimization

Multi-Channel Microscale Nerve Cuffs for Spatially Selective Neuromodulation

Fabrication and Characterization of a Parylene-Based Three-Dimensional Microelectrode Array for Use in Retinal Prosthesis

Electrode Design for Electrotactile Feedback With Reduced Interference to Myoelectric Signal

Flexible, multichannel cuff electrode for selective electrical stimulation of the mouse trigeminal nerve

Modulating individual axons and axonal populations in the peripheral nerve using transverse intrafascicular multichannel electrodes

Highly Sensitive and Omnidirectionally Stretchable Bioelectrode Arrays for In Vivo Neural Interfacing

A flexible three-dimensional electrode mesh: An enabling technology for wireless brain–computer interface prostheses

Surgical Suture Inspired Wire Microelectrodes Implant for Enhancing Functional Electrical Stimulation