Abstract:<p>Craniomaxillofacial reconstruction implants, which are extensively used in head and neck surgery, are conventionally made in standardized forms. During surgery, the implant must be bended manually to match the anatomy of the individual bones. The bending process is time-consuming, especially for inexperienced surgeons. Moreover, repetitive bending may induce undesirable internal stress concentration, resulting in fatigue under masticatory loading <em>in vivo</em> and causing various complications such as implant fracture, screw loosening, and bone resorption. There have been reports on the use of patient-specific 3D printed implants for craniomaxillofacial reconstruction, although few reports have considered implant quality. In this paper, we present a systematic approach for making 3D printed patient-specific surgical implants for craniomaxillofacial reconstruction. The approach consists of three parts: First, an easy-to-use design module is developed using Solidworks® software, which helps surgeons to design the implants and the axillary fixtures for surgery. Design engineers can then carry out the detailed design and use finite-element simulation (FEM) to optimize the design. Second, the fabrication process is carried out in three steps: ① testing the quality of the powder; ② setting up the appropriate process parameters and running the 3D printing process; and ③ conducting post-processing treatments (i.e., heat and surface treatments) to ensure the quality and performance of the implant. Third, the operation begins after the final checking of the implant and sterilization. After the surgery, postoperative rehabilitation follow-up can be carried out using our patient tracking software. Following this systematic approach, we have successfully conducted a total of 41 surgical cases. 3D printed patient-specific implants have a number of advantages; in particular, their use reduces surgery time and shortens patient recovery time. Moreover, the presented approach helps to ensure implant quality.</p>

Cranial Reconstruction Using Double Side Incremental Forming

PEEK Based Cranial Reconstruction Using Thermal Assisted Incremental Sheet Forming

Patient-Specific Cranial Implant Fabrication: Evaluating Single-Point Incremental Forming with Perforated Titanium Grade-2 Sheets

Cranioplasty for Large-Area Skull Defect with Computer Aided Design/manufacture Non-Model-multi-spot Shaped Titanium Mesh

Investigation of Material Deformation Mechanism in Double Side Incremental Sheet Forming

Investigations on the deformation mechanism of a novel three-sheet incremental forming

Simulation-Based Process Design for Asymmetric Single-Point Incremental Forming of Individual Titanium Alloy Hip Cup Prosthesis

A Systematic Approach for Making 3D-Printed Patient-Specific Implants for Craniomaxillofacial Reconstruction

Strategies to improve the geometric accuracy in asymmetric single point incremental forming

Investigations on a Novel Double-Surface Single Point Incremental Forming Process for Sharp-Corner Features

Analytical and Experimental Investigations on Deformation Mechanism and Fracture Behavior in Single Point Incremental Forming

Increasing the Formability of CP-Ti During Incremental Sheet Forming with an Auxiliary Sheet

Multi-step Toolpath Approach of Improving the Dimensional Accuracy of a Non-Axisymmetric Part in Incremental Sheet Forming and Its Mechanism Analysis

Experimental and Finite Element Investigation of Over-Bending Phenomenon in Double-Sided Incremental Forming (DSIF) of Aluminium Sheets

Craniofacial Reconstruction by a Cost-Efficient Template-Based Process Using 3D Printing

Effective Forming Strategy for Double-Sided Incremental Forming Considering In-Plane Curvature and Tool Direction

Numerical and experimental studies for the effects of through-the-thickness shear on formability in single point incremental forming

Improving the Accuracy of Double-Sided Incremental Forming Simulations by Considering Kinematic Hardening and Machine Compliance

Numerical simulation of stamping process of super large area cranial prosthesis

Integrating Clay Modeling in Implant Fabrication for Craniofacial Defect

In vivo validation of highly customized cranial Ti-6AL-4V ELI prostheses fabricated through incremental forming and superplastic forming: an ovine model study