Abstract:This paper presents an analytical model to study the structural effects of a capacitive tactile sensor array on its capacitance changes and sensitivities. The tactile sensor array has 8 x 8 sensor units, and each unit utilizes the truncated polydimethylsiloxane (PDMS) pyramid array structure as the dielectric layer to enhance the sensing performance. To predict the capacitance changes of the sensor unit, it is simplified into a two-layered structure: upper polyethylene terephthalate (PET) film and bottom truncated PDMS pyramid array. The upper PET is modeled by a displacement field function, while each of the truncated pyramids is analyzed to obtain its stress-strain relation. Using the Ritz method, the displacement field functions are solved. The deformation of the upper electrodes and the capacitance changes of the sensor unit can then be calculated. Using the developed model, the structural effects of the truncated PDMS pyramid array and the PDMS bump on the capacitance changes and sensitivities are studied. To achieve the largest capacitance changes, the dimensions have been optimized for the sensor unit. To verify the developed model, we have fabricated the sensor array, and the average sensitivities of the sensor unit to the x-, y-, and z-axes force are 0.49, 0.50, and 0.32% mN(-1), respectively, while the model predicted values are 0.54, 0.54, and 0.35% mN(-1). Results demonstrate that the developed model can accurately predict the sensing performance of the sensor array and could be utilized for structural optimization.

Corner Effect of Micro-Comb Capacitive Structure

The micro mechanical environment on the comb capacitive micro-machined gyroscope

Analysis of mechanical errors of planar capacitive sensor for two dimensional displacement measurement

Analysis on Stiction of Micro-comb Structure in MEMS

Analysis On The Adhesion Of Micro-Comb Structure In Mems

Theoretical and Experimental Study of Capacitance Considering Fabrication Process and Edge Effect for MEMS Comb Actuator

Analysis on the Detection Capacitance of Comb Micro-Machined Gyroscope

Effect of Non-Parallel Combs of the Capacitive Micro-Sensor on the Pulse Signal Response

A new high precision simulation method for MEMS comb actuator and the experiment

Effects of Combs on Coupling Error in the Vibratory MEMS Gyroscope with Various Air Dampings

Error Analysis of a Spherical Capacitive Sensor for the Micro-Clearance Detection in Spherical Joints

Simulation of characteristic of comb-gimbal micromachined gyroscope

An Analytical Model for Studying the Structural Effects and Optimization of A Capacitive Tactile Sensor Array

Vertical Comb-Finger Capacitive Actuation and Sensing for CMOS-MEMS

Device Modeling and Optimization of MEMS Based Capacitive Pressure Sensor

A method to measure the micro-capacitance for MEMS comb actuators

Modeling and Analysis of MEMS Capacitive Pressure Sensors with Vertical Comb Fingers

Design And Simulation Of A Completely Decoupled Micromechanical Gyroscope

A Micromachined Silicon-on-Glass Accelerometer with an Optimized Comb Finger Gap Arrangement

Consideration of the Fringe Effects of Capacitors in Micro Accelerometer Design

A Capacitive Interface Circuit with Capacitor Mismatch Auto-compensation for MEMS Gyroscope.