Abstract:Xinjiang has a temperature difference of 20°C between day and night, interannual temperature difference of 50°C, the control of the temperature cracks in mass concrete becomes difficult. Although low-heat portland (P·LH) cement concrete containing fly ash (FA) can reduce hydration heat, the mismatch between its mechanical and thermal properties is still not fully resolved. An attempt to explore the effect of FA on the competitive hydration reaction of C3A and C3S at super-early ages, and how this effect changes the physical and chemical properties of hardened cement pastes by electrical resistivity and zeta potential and common microstructure test methods, and to provide a theoretical basis for optimization of mechanical and thermal properties of P·LH cement concrete with FA. Results showed that in the fast dissolution stage, a numerous {Ca6[Al(OH)6]224H2O}6+ ions and a very small amount of H3SiO4−/H2SiO42− ions were formed, and incorporating 20%, 30%, 40% FA primarily inhibited the Al(OH)63− hydration and the {Ca6[Al(OH)6]224H2O}6+ generation, resulting in the generation time of AFt in comparison with pure cement, respectively, delayed by 44%, 140%, and 524%. This phenomenon decreased the nucleation and crystallization growth rate of AFt and Ca(OH)2 in the induction stage, and reduced the consumption of gypsum in the acceleration stage. Hence, monosulfoaluminate did not exist for pastes with more than 30% FA, and the number of particles involved in the reaction for the P·LH cement stone with 20%, 30%, and 40% FA decreased by 4.0%, 46.5%, and 52.0% in the deceleration stage compared with the pure cement. The research results can provide a theoretical reference for modifying chemical properties of FA to meet the matching of mechanical strength and thermal of P·LH cement.

Influence of Sucrose on Hydration Process of Portland Cement

Influence Mechanism of Sucrose on Hydration Process of Portland Cement

Effects of HRA on the properties of super-retarded cement-based materials with sucrose

Influences and Mechanisms of Nano-C-S-H Gel Addition on Fresh Properties of the Cement-Based Materials with Sucrose as Retarder

A sweet answer to how sucrose delays tricalcium silicate hydration

Preparation of C-S-H Gels by Mechanochemistry and Its Influences on Properties of Super-Retarded Cement-Based Materials with Sucrose

Effects of Controlled Release Silica Nanocapsules Containing Sucrose on the Heat Release of Cement Hydration

The Role of Sucrose on Enhancing Properties of Graphene Oxide Reinforced Cement Composites Containing Fly Ash

Regulation of Admixtures on the Rheological Behavior of Cementitious Grout

Study of Aluminum Sulfate and Anhydrite on Cement Hydration Process

How Competitive Hydration between C 3 A and C 3 S in the Fast Dissolution Stage Affects the Hydration of Low-Heat Portland Cement Blended Pastes

Development of a Novel Double-Sulfate Composite Early Strength Agent to Improve the Hydration Hardening Properties of Portland Cement Paste

Investigation on the Unusual Hydration and Hardening Process of a Portland Cement with Low Alkali Sulfate Content

Influence of silane on hydration characteristics and mechanical properties of cement paste

Hydration behavior and strength development of supersulfated cement prepared by calcined phosphogypsum and slaked lime

Influence of citric acid and sodium gluconate on hydration of calcium sulfoaluminate cement at various temperatures

Preparation of Nano-Sized C-S-H and Its Acceleration Mechanism on Portland Cement Hydration at Different Temperatures

Influence of C–S–H seed and sodium sulfate on the hydration and strength of limestone calcined clay cement

Effect of polysaccharides on the hydration of cement paste at early ages

Sucrose and Lignosulfonate Acid: Which One is More Effective as a Concrete Setting Retarder?

Influence of Sodium Aluminate on Cement Hydration and Concrete Properties