Abstract:The reduction of the transition curvature of written bits in heat-assisted magnetic recording (HAMR) is expected to play an important role for the future areal density increase of hard disk drives. Recently a write head design with flipped write and return poles was proposed. In this design a large spatial field gradient of the write head was the key to significantly reduce the transition curvature. In this work we optimized the write pole of a heat-assisted magnetic recording head in order to produce large field gradients as well as large fields in the region of the heat pulse. This is done by topology optimization. The simulations are performed with dolfin-adjoint. For the maximum field gradients of $8.1\,$mT/nm, $8.6\,$mT/nm and $11.8\,$mT/nm, locally resolved footprints of an FePt like hard magnetic recording medium are computed with a coarse-grained Landau-Lifshitz-Bloch (LLB) model and the resulting transition curvature is analysed. Additional simulations with a bilayer structure with $50\%$ hard and $50\%$ soft magnetic material are computed. The results show that for both recording media, the optimized head design does not lead to any significant improvement of the written track. Thus, we analyse the transition curvature for the optimized write heads theoretically with an effective recording time window (ERTW) model. Moreover, we check how higher field gradients influence the curvature reduction. The results show that a simple optimization of the conventional head design design is not sufficient for effective curvature reduction. Instead, new head concepts will be needed to reduce transition curvature.

Precise Measurement of the Transition Curvature in Magnetic Recording

Efficiently reducing transition curvature in heat-assisted magnetic recording with state-of-the-art write heads

Micromagnetic Analysis of Transition Noise for High-Density Perpendicular Recording

Magnetic Film Thickness Effects on the Recording Performance of Perpendicular Media

RESEARCH ON NEW NONDESTRUCTIVE MEASUREMENT METHOD OF B-H CURVE OF SOFT MAGNETIC MATERIALS WITH SHEET GEOMETRY

Dynamic Simulation of High-Density Perpendicular Recording Head and Media Combination

Non-Contact Magnetic Force Microscopy of Recording Media by Ex Situ Tip Magnetization Reversal Method

Calculation Of Dynamic Write Field For Perpendicular Recording Head

Impact of Media Design on Track Edge in Perpendicular Magnetic Recording

In-Situ Measurement for Flying Height Modulation of Magnetic Head by Symmetrical Common-Path Heterodyne Interferometry

Write head design for effective curvature reduction in heat-assisted magnetic recording by topology optimization

Measuring nanoscale magnetic write head fields using a hybrid quantum register

Heat-assisted Magnetic Recording by a Near-Field Transducer with Efficient Optical Energy Transfer

Skew Angle Effects on Disk Recording Performance at High Recording Densities

Track Edge and Zero-frequency Noise in Isotropic and Oriented Thin Film Media with Large Skew Angles.

Flying-Height Measurement with a Symmetrical Common-Path Heterodyne Interferometry Method

Clearance Measurement of Commercial Slider/disk with a Symmetrical Common-Path Heterodyne Interferometry

Noncontact Measuring Profile of Magnetic Disk with Optical Methods

Noise reduction in heat-assisted magnetic recording by optimizing a high/low Tc bilayer structure

Statistical analysis of read-back signals in magnetic recording on granular media

Integrated Near Field Transducer Heat Assisted Magnetic Recording Head: Design And Recording Demonstration