Influence of Central Coke Ratio on the Internal State of Blast Furnace
Pengbo Liu,Shusen Cheng,Zhao Liu
DOI: https://doi.org/10.1002/srin.202400356
IF: 2.1258
2024-09-19
steel research international
Abstract:This article investigates the influence of the central coke ratio on burden distribution at the throat, the position of the cohesive zone, gas flow rate, gas temperature, and burden temperature. Central coke charging (CCC) is a widely used burden distribution method for blast furnaces (BFs). Adjusting the central coke ratio can change the burden temperature field and affect the smooth operation of BF. This study presents a coupled physical and mathematical model, incorporating particle motion, gas flow, and heat transfer between the burden and gas in two 5500 m3 BFs. The central coke ratios of the blast furnace A (BFA) and blast furnace B (BFB) is 15% and 20%, respectively. The root positions of the cohesive zone in the BFA and BFB are in the lower part of the stack and bosh zones, respectively. In the central area of the BF, the gas flow rate, gas temperature, and burden temperature of the BFB are higher. In the edge area of the BF, the gas flow rate, gas temperature, and burden temperature of the BFA are higher. The actual top gas temperature and gas pressure verify the accuracy of the proposed model. This model investigates the influence of the central coke ratio on the position of the cohesive zone, gas flow rate, gas temperature, and burden temperature, providing a cost‐effective method for studying the effect of the burden distribution matrix on the internal state of the BF.
metallurgy & metallurgical engineering