Experimental Study of Low Temperature Diesel Combustion Sensitivity to Engine Operating Parameters

g p mctaggartcowan,shuang cong,c p garner,emad wahab,mark peckham

DOI: https://doi.org/10.1115/1.4006377

2012-01-01

Abstract:This work elucidated which engine operating parameters have the greatest influence on Low temperature diesel combustion (LTC) and emissions. Key parameters were selected and evaluated at low and intermediate speed and load conditions using fractional factorial and Taguchi orthogonal experimental designs. The variations investigated were: about +/- 5% in EGR rate, fuel injection quantity and engine speed respectively; and +/- 10 degrees C in intake charge temperature. The half-fractional factorial results showed that the interactions among these parameters were negligible for a specific load/speed point. The Taguchi orthogonal method could be used as an efficient DoE tool for studying the multi-parameter 'small-scale transients' that a diesel engine would be likely to encounter when operating in LTC modes. LTC showed the most significant sensitivity to EGR rate variations, where an increase from 60% to 63% in EGR rate doubled THC and CO emissions and reduced combustion stability. LTC was also sensitive to the fuel injection quantity with an increase in injected mass lowering the overall oxygen-fuel ratio and thereby increasing THC and CO emissions. These two parameters influenced the oxygen concentration in the intake charge; which was identified to be a decisive parameter for the LTC combustion and emissions. Intake charge temperature affected the total charge quantity trapped in the cylinder and showed noticeable influence on CO emissions for the low speed intermediate load condition. Variations in engine speed showed a negligible influence on the LTC combustion processes and emissions. [DOI: 10.1115/1.4006377]