Abstract:Past research has shown that advancing diesel injection timing is a promising approach to decrease the unburned methane and greenhouse gas (GHG) emissions of natural gas/diesel dual-fuel engines at lower engine loads. However, this benefit may not persist under medium to high load-low speed conditions. To explore this, the present paper uses experiments and detailed computational fluid dynamic (CFD) modeling to investigate the impacts of diesel injection timing on the combustion and emissions performance of a heavy-duty natural gas/diesel dual-fuel engine under four different engine load-speed conditions. The results showed that advancing diesel injection timing increases the peak pressure, thermal efficiency, and NOx emissions for all examined engine load-speed conditions. Advancing diesel injection timing also significantly decreases the unburned methane and CO2-equivalent (GHG) emissions of the dual-fuel engine under low load-low speed and medium load-high speed conditions. The concentration of OH and CH4 revealed that the central part of the combustion chamber is the main source of the unburned methane emissions under low load-low speed and medium load-high speed conditions, and advancing diesel injection timing significantly improves the combustion of natural gas-air mixture in this region. However, advancing diesel injection timing slightly increases the unburned methane emissions trapped in the crevice volume. However, this slight increase in the unburned methane emissions in the crevice volume is much lower than its significant decrease in the central region of the combustion chamber. At medium to high load-low speed conditions, there is almost no unburned methane in the central part of the combustion chamber, and the crevice region is considered as the main source of unburned methane emissions. As a result, advancing diesel injection timing does not improve the combustion of natural gas-air mixture in the central part of the combustion chamber but slightly increases the unburned methane trapped in the crevice region. This is the main reason that advancing diesel injection timing slightly increases the unburned methane emissions under medium to high load-low speed conditions. Overall, advancing diesel injection timing significantly increases thermal efficiency and decreases the unburned methane and GHG emissions under low load-low speed and medium load-high speed conditions. It improves the thermal efficiency under medium to high load-low speed conditions, but comes at the expense of increased methane and unchanged GHG emissions.

Combustion and Emission Characteristics of an Electronically-Controlled Common-Rail Dual-Fuel Engine

Engine Performance and Emissions for a Heavy-Duty Diesel Engine Converted to Stoichiometric Natural Gas Operation

Analysis of Two-Stage Natural-Gas Lean Combustion Inside a Diesel Geometry

An Experimental Study of the Combustion Process in a Natural-Gas Spark-Ignition Engine

Twin-Peak Heat Release Phenomenon Inside a Heavy-Duty Diesel Engine Retrofitted to Natural-Gas Spark Ignition

Experimental study on in-cylinder combustion and exhaust emissions characteristics of natural gas/diesel dual-fuel engine with single injection and split injection strategies

Combustion Process and Emissions of A Heavy-Duty Engine Fueled with Directly Injected Natural Gas and Pilot Diesel

The effect of ignition diesel injection conditions on the combustion process of natural gas engine

Investigation on combustion characteristics and gas emissions of a high-pressure direct-injection natural gas engine at different combustion modes

Impact of engine control variables on low load combustion efficiency and exhaust emissions of a methane-diesel dual fuel engine

The Effects of Partially Premixed Combustion Mode on the Performance and Emissions of a Direct Injection Natural Gas Engine

Effects of Injection Parameters on the Combustion and Emission Characteristics of Diesel-Piloted Direct-Injection Natural Gas Engine during Idle Conditions

Numerical Investigation on the Influence of Injection Location and Injection Strategy on a High-Pressure Direct Injection Diesel/Methanol Dual-Fuel Engine

Parameter Study of Common Rail Pressure for Low Octane Gasoline Multiple Premixed Compression Ignition (mpci) in Light-Duty Diesel Engine

Experimental investigations of the effects of pilot injection on combustion and gaseous emission characteristics of diesel/methanol dual fuel engine

Effect of diesel injection timing on the combustion of natural gas/diesel dual-fuel engine at low-high load and low-high speed conditions

Experimental Investigation on Performance and Heat Release Analysis of a Pilot Ignited Direct Injection Natural Gas Engine

Combustion and Emission Characterization of a CRCI Engine Fueled by Cyclopentanol/Diesel Blends and Verification Through Real-Time Vehicle Test

An experimental investigation of the combustion process and the injection strategy of a heavy-duty diesel engine equipped with a common rail fuel injection system

Effects of low-carbon high-reactivity fuels on combustion and emission characteristics in a part-load condition of a DICI engine

The Impact of Fuel and Injection Strategy on Combustion Characteristics, Emissions and Efficiency in Gasoline Compression Ignition Operation