Abstract:alpha-MoO3 nanobelts were successfully prepared by a facile hydrothermal method with sodium molybdate (Na2MoO4) as the Mo source and NaCl as the capping agent. The as-prepared products were characterized using Fourier transformation infrared spectrophotometry (FT-IR), X-ray powder diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM) and selected area electronic diffraction (SAED) and their pseudocapacitive properties were investigated in a 0.5 M aqueous Li2SO4 solution by cyclic voltammetry (CV), chronopotentiometry (CP) and AC impendence. The results show that the dimensions of the as-prepared alpha-MoO3 nanobelts are 200-400 nm in width, ca. 60 nm in thickness and 3-8 mu m in length. The redox potential for the alpha-MoO3 nanobelts is found in the range of -0.3 to -1.0 V vs. SCE, which indicates that the alpha-MoO3 nanobelts can be used as anode electrode materials for hybrid supercapacitors. The specific capacitances of the alpha-MoO3 nanobelts at 0.1, 0.25, 0.5 and 1 A g(-1) are 369, 326, 256 and 207 F g(-1), respectively. The maximum specific capacitance of the alpha-MoO3 nanobelts is much higher than those of MoO3 nanoplates with 280 F g(-1), MoO3 nanowires with 110 F g (1) and MoO3 nanorods with 30 F g (1) recently reported in literature. Furthermore, the alpha-MoO3 nanobelt electrode exhibits a good cycle stability with more than 95% of the initial specific capacitance maintained after 500 cycles. Additionally, the present route to prepare nanostructured MoO3 is much less expensive than those with Mo powders as the Mo source. Overall, the obtained high performance alpha-MoO3 nanobelts could be a promising electrode material for supercapacitors.

Electrochemical Behavior of Α-Moo 3 Nanobelts As Cathode Material for Lithium Ion Batteries

In-situ TEM Experiments and First-Principles Studies on the Electrochemical and Mechanical Behaviors of Α-Moo3 in Li-ion Batteries

Electrochemical Behavior of Alpha-Moo3 Nanorods As Cathode Materials for Rechargeable Lithium Batteries.

Hydrothermal Synthesis and Electrochemical Properties of Α-Moo3 Nanobelts Used As Cathode Materials for Li-ion Batteries

Alpha-Moo3 Nanobelts: A High Performance Cathode Material For Lithium Ion Batteries

Hydrothermal synthesis of single crystal MoO 3 nanobelts and their electrochemical properties as cathode electrode materials for rechargeable lithium batteries

Boosting the electrochemical performance of MoO 3 anode for long-life lithium ion batteries: Dominated by an ultrathin TiO 2 passivation layer

HxMoO3 Nanobelts with Better Performance As Anode in Lithium-Ion Batteries

Coating of Α-Moo3 on Nitrogen-Doped Carbon Nanotubes by Electrodeposition As a High-Performance Cathode Material for Lithium-Ion Batteries

MoO3 nanobelts cathode promotes Al3+ insertion in aqueous aluminum-ion batteries

MoO3 Nanosheet Arrays As Superior Anode Materials for Li- and Na-ion Batteries

Freestanding MoO 3−x nanobelt/carbon nanotube films for Li-ion intercalation pseudocapacitors

HxMoO3@C Nanobelts: Green Synthesis and Superior Lithium Storage Properties

Ultrasonic Synthesis of Α-Moo3 Nanobelt@CNTs Composite for Lithium Battery and Its Electrochemical Performances

Electrochemical Performance Of Alpha-Moo3-In2o3 Core-Shell Nanorods As Anode Materials For Lithium-Ion Batteries

Α-Moo 3 Nanowire Bundles Fabricated from a Self-Assembled Organic–inorganic Precursor As Cathodes for Lithium-Ion Batteries

Superior Lithium Storage Performance in MoO3 by Synergistic Effects: Oxygen Vacancies and Nanostructures

Characterization of Moo3 Nanobelt Cathode for Li-Battery Applications

High Electrochemical Performances of Α-Moo3@mno2 Core-Shell Nanorods As Lithium-Ion Battery Anodes

Facile Synthesis of Α-Moo3 Nanobelts and Their Pseudocapacitive Behavior in an Aqueous Li2SO4 Solution

Preparation of Carbon Coated Moo2 Nanobelts and Their High Performance As Anode Materials for Lithium Ion Batteries