Abstract:To reduce surface contamination and increase battery life, MoO3 nanoparticles were coated with a high-voltage (5 V) LiNi0.5Mn1.5O4 cathode material by in-situ method during the high-temperature annealing process. To avoid charging by more than 5 V, we also developed a system based on anode-limited full-cell with a negative/positive electrode (N/P) ratio of 0.9. The pristine LiNi0.5Mn1.5O4 was initially prepared by high-energy ball-mill with a solid-state reaction, followed by a precipitation reaction with a molybdenum precursor for the MoO3 coating. The typical structural and electrochemical behaviors of the materials were clearly investigated and reported. The results revealed that a sample of 2 wt.% MoO3-coated LiNi0.5Mn1.5O4 electrode exhibited an optimal electrochemical activity, indicating that the MoO3 nanoparticle coating layers considerably enhanced the high-rate charge–discharge profiles and cycle life performance of LiNi0.5Mn1.5O4 with a negligible capacity decay. The 2 wt.% MoO3-coated LiNi0.5Mn1.5O4 electrode could achieve high specific discharge capacities of 131 and 124 mAh g−1 at the rates of 1 and 10 C, respectively. In particular, the 2 wt.% MoO3-coated LiNi0.5Mn1.5O4 electrode retained its specific capacity (87 mAh g−1) of 80.1% after 500 cycles at a rate of 10 C. The Li4Ti5O12/LiNi0.5Mn1.5O4 full cell based on the electrochemical-cell (EL-cell) configuration was successfully assembled and tested, exhibiting excellent cycling retention of 93.4% at a 1 C rate for 100 cycles. The results suggest that the MoO3 nano-coating layer could effectively reduce side reactions at the interface of the LiNi0.5Mn1.5O4 cathode and the electrolyte, thus improving the electrochemical performance of the battery system.

Characterization of Moo3 Nanobelt Cathode for Li-Battery Applications

An Electrochemical Investigation on (moo3+pvp+pva) Nanobelts for Lithium Batteries

Freestanding MoO 3−x nanobelt/carbon nanotube films for Li-ion intercalation pseudocapacitors

In-situ TEM Experiments and First-Principles Studies on the Electrochemical and Mechanical Behaviors of Α-Moo3 in Li-ion Batteries

MoO3 Nanobelts/Reduced Graphene Oxide (RGO) Composites as a High-Performance Anode Material for Lithium Ion Batteries

Conformal Conversion of Polyphosphazene@Sb2MoO6 Nanowires to N/S-Doped/Carbon-Coated SbPO4/MoOx for High-performance Lithium Storage

Electrochemical Behavior of Alpha-Moo3 Nanorods As Cathode Materials for Rechargeable Lithium Batteries.

Three-dimensionally ordered mesoporous multicomponent (Ni, Mo) metal oxide/N-doped carbon composite with superior Li-ion storage performance

Ultrafine molybdenum oxycarbide nanodots encapsulated in N,P co-doped carbon nanofibers as an advanced anode material for lithium-ion batteries

Preparation of Carbon Coated Moo2 Nanobelts and Their High Performance As Anode Materials for Lithium Ion Batteries

Boosting the electrochemical performance of MoO 3 anode for long-life lithium ion batteries: Dominated by an ultrathin TiO 2 passivation layer

Boosting the capacity and stability of a MoO3 cathode via valence regulation and polypyrrole coating for a rechargeable Zn ion battery

MoO3 nanobelts cathode promotes Al3+ insertion in aqueous aluminum-ion batteries

Moo2 Synthesized by Reduction of Moo3 with Ethanol Vapor As an Anode Material with Good Rate Capability for the Lithium Ion Battery

Two-dimensional Mo-based compounds for the Li-O2 batteries: Catalytic performance and electronic structure studies

Defect-Rich MoO 3 Nanobelts for ultrafast and wide-temperature proton battery

MoO3 Nanoparticle Coatings on High-Voltage 5 V LiNi0.5Mn1.5O4 Cathode Materials for Improving Lithium-Ion Battery Performance

Moo2@Carbon Hollow Microspheres With Tunable Interiors And Improved Lithium-Ion Battery Anode Properties

In Situ Synthesis and Electrochemical Performance of MoO3-x Nanobelts As Anode Materials for Lithium-Ion Batteries.

Partially Nitrided Molybdenum Trioxide with Promoted Performance As an Anode Material for Lithium-Ion Batteries

Carbon nanofiber-wrapped core–shell MoO3 nanorod composite material for lithium-ion battery anodes