Abstract:In the industrial low-temperature grain-oriented (LTGO) silicon steel normalized sheet, there are a certain number of fine equiaxed grains distributed along the rolling direction. However, the formation mode of the fine equiaxed grains and the influence of them on magnetic properties have not yet been well understood. In the present work, the above issues were investigated using field emission scanning electron microscopy (SEM), field emission transmission electron microscopy (TEM), X-ray diffraction (XRD), high temperature confocal scanning laser microscopy (HTCSLM), etc. It was found that (1) the fine equiaxed grains could be divided into many grain colonies according to grain orientation, and within each colony, the grain orientations were similar; (2) during normalizing, the fine equiaxed grains were mainly generated inside the elongated deformed grains which contained a large number of subgrains; (3) the amount of α → γ phase transformation during the normalizing was very small. Therefore, it can be inferred that the fine equiaxed grains were mainly produced by subgrain coalescence, rather than by phase transformation. Moreover, γ-grain (〈111〉 // ND) colonies with ideal grain size could be formed in the fine equiaxed grain regions after ideal normalizing process. Due to the heredity of microstructure and texture, γ-grain colonies, which can facilitate the formation of the precise Goss texture ({110} 〈001〉 ) during high-temperature annealing, were formed in the primary recrystallized matrix after cold rolling, decarburizing and nitriding, as a result, the magnetic properties of the final product were significantly improved. The present work can provide help to further improve the understandings of the microstructural evolution in the LTGO silicon steel normalized sheet and the influence of normalized microstructure on magnetic properties.

Dependence of Texture Development on the Grain Size of Tertiary Oxide Scales Formed on a Microalloyed Steel

A Comparison of Texture Development in an Experimental and Industrial Tertiary Oxide Scale in a Hot Strip Mill

Local strain analysis of the tertiary oxide scale formed on a hot-rolled steel strip via EBSD

The Role of Oxide-Scale Microtexture on Tribological Behaviour in the Nanoparticle Lubrication of Hot Rolling

A Review of Microstructure and Microtexture of Tertiary Oxide Scale in a Hot Strip Mill

Electron Backscatter Diffraction Analysis of Low-Misorientation-Angle Boundary and High-Energy Boundary in the Hot-Rolled Plate of Grain-Orientated Silicon Steel

Texture Intensity in Grain-Oriented Steel in the Main Stages of the Production Cycle

Texture and inhibitor features of grain-oriented pure iron produced by different cold-rolling processes

Texture Evolution during Recrystallization and Grain Growth in Non-Oriented Electrical Steel Produced by Compact Strip Production Process

A comprehensive study on texture evolution and recrystallization mechanism of Fe-4.5 wt% Si with strong {114}

The Early Stage Formation of Shear Orientations and the Stability of //ND Orientations During Hot Rolling in Electrical Steels

The origin of {113} grains and their impact on secondary recrystallization in producing ultra-thin grain-oriented electrical steel

Effects of Coiling Temperature and Cooling Condition on Transformation Behavior of Tertiary Oxide Scale

Characterization of Oxide Scales Formed on Plain Carbon Steels in Dry and Wet Atmospheres and Their Eutectoid Transformation from FeO in Inert Atmosphere

Microstructure, texture and magnetic properties of the semi-processed strip-cast non-oriented electrical steel

Goss Texture Evolution in a Grain-Oriented Fe-6.5wt%Si Steel Processed by Strip-Casting

Development of microstructure and texture in strip casting grain oriented silicon steel

Isothermal Structure Transformation and Kinetics Behavior of Oxide Scale on Low Carbon Steel

Microstructural and microtextural characterization of oxide scale on steel using electron backscatter diffraction

Dislocation Strengthening and Texture Evolution of Non-Oriented Fe-3.3 wt% Si Steel in Double Cold Rolling

Origin of fine equiaxed grains in industrial low-temperature grain-oriented silicon steel normalized sheet and their influence on magnetic properties