Abstract:In the industrial low-temperature grain-oriented (LTGO) silicon steel normalized sheet, there are a certain number of fine equiaxed grains distributed along the rolling direction. However, the formation mode of the fine equiaxed grains and the influence of them on magnetic properties have not yet been well understood. In the present work, the above issues were investigated using field emission scanning electron microscopy (SEM), field emission transmission electron microscopy (TEM), X-ray diffraction (XRD), high temperature confocal scanning laser microscopy (HTCSLM), etc. It was found that (1) the fine equiaxed grains could be divided into many grain colonies according to grain orientation, and within each colony, the grain orientations were similar; (2) during normalizing, the fine equiaxed grains were mainly generated inside the elongated deformed grains which contained a large number of subgrains; (3) the amount of α → γ phase transformation during the normalizing was very small. Therefore, it can be inferred that the fine equiaxed grains were mainly produced by subgrain coalescence, rather than by phase transformation. Moreover, γ-grain (〈111〉 // ND) colonies with ideal grain size could be formed in the fine equiaxed grain regions after ideal normalizing process. Due to the heredity of microstructure and texture, γ-grain colonies, which can facilitate the formation of the precise Goss texture ({110} 〈001〉 ) during high-temperature annealing, were formed in the primary recrystallized matrix after cold rolling, decarburizing and nitriding, as a result, the magnetic properties of the final product were significantly improved. The present work can provide help to further improve the understandings of the microstructural evolution in the LTGO silicon steel normalized sheet and the influence of normalized microstructure on magnetic properties.

Texture and inhibitor features of grain-oriented pure iron produced by different cold-rolling processes

Evolution of microstructure, texture and inhibitor along the processing route for grain-oriented electrical steels using strip casting

Effect of decarburization annealing temperature and time on the carbon content, microstructure, and texture of grain-oriented pure iron

The effect of grain size before cold rolling on the magnetic properties of thin-gauge non-oriented electrical steel

Grain Boundary Plane Distributions in a Cold Rolled and Annealed High Purity Iron

Effect of Slab Reheating Temperature on Cold Rolling Texture Evolution of Nb-Containing Grain-Oriented Silicon Steel

The origin of {113} grains and their impact on secondary recrystallization in producing ultra-thin grain-oriented electrical steel

Investigation of microstructure and texture as related to primary recrystallization of grain-oriented silicon steel

Machine Learning-Aided Analysis of the Rolling and Recrystallization Textures of Pure Iron with Different Cold Reduction Ratios and Cold-Rolling Directions

Evolution of Texture in High Permeability Grain Oriented Silicon Steel Produced by Casting Thin Slab and Rolling Process

Microstructure and texture evolution of ultra-thin grain-oriented silicon steel sheet fabricated using strip casting and three-stage cold rolling method

Texture evolution in grain-oriented electrical steel during hot band annealing and cold rolling

Origin of fine equiaxed grains in industrial low-temperature grain-oriented silicon steel normalized sheet and their influence on magnetic properties

Coordinate regulation mechanism of primary recrystallization texture and microstructure of grain-oriented silicon steel

Development of microstructure and texture in strip casting grain oriented silicon steel

Effects of Two-Stage Cold Rolling Schedule on Microstructure and Texture Evolution of Strip Casting Grain-Oriented Silicon Steel with Extra-Low Carbon

Ultrathin-gauge high silicon non-oriented electrical steel with high permeability and low core loss fabricated by optimized two-stage cold rolling method

A comprehensive study on texture evolution and recrystallization mechanism of Fe-4.5 wt% Si with strong {114}

Texture Evolution during Recrystallization and Grain Growth in Non-Oriented Electrical Steel Produced by Compact Strip Production Process

Evolution of Grain Interfaces in Annealed Duplex Stainless Steel after Parallel Cross Rolling and Direct Rolling

Grain Refinement and Texture Change in Interstitial Free Steels after Severe Rolling and Ultra-Short Annealing