Abstract:In order to investigate the effect of shim compensation for nonuniform gaps in aircraft assembly, the influence of the shims with different material and parameters on bolted joints is studied in this paper. According to the real material and assembly conditions of the aircraft joint structures, the specimen and experiment are designed to obtain the tensile performance of the joint structures with different shims. A three-dimensional finite element model, which incorporates the Johnson–Cook material property of the alloys, traction-separation law of liquid shims, contact relationships between the joint elements, and boundary conditions of the tensile process, is established with the specimen configurations. After validating through comparing with the experimental results, the modeling method is adopted to simulate the tensile response of the bolted joints with shims. Furthermore, both the influence of the shim material and thickness on the mechanical behaviors of bolted joints is investigated in detail. Shims can considerably reduce the assembly stress of joint structures and improve the joint stiffness and load capacity, and this effect is more remarkable with the increase of gap values. Liquid shims improve the joint stiffness due to its cohesive ability, while solid shims improve the joint load capacity. Hybrid shims possess a composite shimming effect of liquid and solid shims. Whatever the shim material is applied, the joint stiffness and strength drop with the growth of shim thickness, so strict deviation control method should be taken to ensure the assembly gaps as small as possible. The research results enhance the knowledge of shimming effect on joint structures, and thus offer positive guidance for practical application in aircraft assembly.

An experimental study on the effect of bolt-hole clearance and bolt torque on single-lap, countersunk composite joints

Effect of Interference Fit Size on Local Stress in Single Lap Bolted Joints

Strengthening of Composite T-joints Using Ø 0.11 Mm Z-pins Via an Ultrasound-Guided Insertion Process

Influence of Interference Fit Size on Hole Deformation and Residual Stress in Hi-Lock Bolt Insertion

Experimental and Numerical Analyses of the Shimming Effect on Bolted Joints with Nonuniform Gaps

Tests and Numerical Study of Single-Lap Thermoplastic Composite Joints Bolted by Countersunk

Effects of Countersunk Hole’s Geometrical Deviation on the Strength of Bolted Carbon Fiber–reinforced Plastic/polymer Metal Joints under Tensile Loading

Bearing failure and strengthening mechanism of countersunk thin-ply laminated joints using an interference-fit bolt

Combined and Interactive Effects of Interference Fit and Preloads on Composite Joints

Experimental and numerical analysis of the mechanical behavior of composite-to-titanium bolted joints with liquid shim

Experimental investigations of bolted, adhesively bonded and hybrid bolted/bonded single-lap joints in composite laminates

Tensile tests and strength estimation for double-lap single-bolt j oints in T800 carbon fiber reinforced composites

A detailed experimental parametric analysis of bolted and hybrid bolted/bonded composite joints

Experimental Study of the Fatigue Performance in Multi Fastener Composite-to-titanium Single Lap Joints

Experimental And Numrical Investigation Of Composities With Single Countersunk Joints

Combined effects and mechanism of interference fit and clamping force on composite mechanical joints

Parametric study on the load-carrying capacity of plain-woven composites hybrid bonded-bolted joints

Effects of Hole Perpendicularity Error on Mechanical Performance of Single-Lap Double-Bolt Composite Joints

Effect of imbalanced interface pre-tightening force on the bearing behavior of carbon fiber reinforced polymer interference-fit lap joint

Effect of Parameters on Local Stress Field in Single-Lap Bolted Joints with the Interference Fit

Bolt-Hole Elongation of Woven Carbon-Epoxy Composite Plates and Joints Using the Digital Image Correlation Technique