Abstract:The main objective of this thesis is to develop a method to investigate stability behaviours of stiffened and unstiffened panels under the influence of in-plane compression and out-of-plane lateral pressure using appropriate simplifications. A test fixture to conduct buckling experiments with lateral pressure is also designed. Due to the deflection caused by the lateral pressure, considerable complexities will be introduced in terms of loading interactions and geometric nonlinearities, which make the analysis both theoretically difficult and computationally intensive. In addition, in aerospace structures, non-cylindrical wing and fuselage panels are potentially exposed to the combined action of in-plane compression and out-of-plane pressure, and the assessment of their stability behaviours becomes an issue of growing concern of structural engineers. To this end, the study of the buckling behaviour of stiffened panels under compression and lateral pressure is of practical importance. Step by step investigations are performed on typical structures from unstiffened isotropic plates to stiffened composite panels using both analytical and finite element approaches. First, linear based methods using equilibrium and energy equations based on classical plate theories are reviewed, and predictions indicate that these methods only validate within the range of small deformation under small pressure loading. Eigenvalue buckling analysis and explicit dynamic procedures are adopted as numerical methods for verification. Simulated results of explicit dynamic procedures in Abaqus predicted the buckling loads fairly well compared with those in literature, revealing that lateral pressure has a positive impact on the stability behaviour of rectangular isotropic plates by postponing the buckling onset. Composite panels behave similarly as isotropic plates in terms of buckling and postbuckling responses. Given a large pressure, the critical buckling load of a simply supported laminate is able to reach up to four times as that of the uniaxially compressed plate. A conceptual design of a test fixture for buckling experimental studies involving compression and lateral pressure is proposed in which pressurized airbags are adopted for generating uniform pressure load. The lateral loads are controlled by the internal pressure of airbags through a pressure gauge. Compression sensors are utilized to calibrate the pressure loads by measuring the reaction forces. A rubber filler pad is laid inside the panel's bays between stringers to eliminate the unevenness on the stiffener side of the panel. Test rigs are designed with the consideration of compatibility with classical buckling experiments to lower the cost. Dynamic explicit simulations of the test reveal that the locations of the first local buckling onsets are shifted from the skin to stiffeners with the increase of lateral pressure. Buckling strengths of the entire stiffened panels exhibit an increase with the increase of lateral pressure. However, this trend is reversed when the pressure load exceeded a certain value at which stiffeners buckle before the skin.

Experimental and Numerical Investigation of Stiffened Composite Curved Panel under Shear and In-Plane Bending

Experiment and Analysis of Hat-Stringer-stiffened Composite Curved Panels under Axial Compression

Computational modelling of postbuckling behavior of composite T-stiffened panels with different bonding methods

Design and optimization of composite sub-stiffened panels

Experimental and numerical research on the analysis methods for buckling and post-buckling of inclined stiffened panel under shear load

Modified Fourier-Galerkin Solution For Aerospace Skin-Stiffener Panels Subjected To Interface Force And Mixed Boundary Conditions

Design of Vertically Stiffened Steel Plate Walls under Combined Uniaxial Compression and Shear Loads

ELASTIC BUCKLING OF STIFFENED STEEL PLATE SHEAR WALL IN SHEAR

Analysis and experimental evaluation framework for buckling and post-buckling of composite stiffened panels

Experiment and Optimization of the Hat-Stringer-stiffened Composite Panels under Axial Compression

Experimental and Numerical Analysis for the Post-Buckling Behavior of Stiffened Composite Panels with Impact Damage

An Experimental and Numerical Study on Impact and Compression after Impact of Stiffened Composite Panels

Elastic-plastic buckling analysis of stiffened panel subjected to global bending in forming process

Test and ultimate load capacity prediction of hat-stiffened composite panel under axial compression

Experimental and numerical research on the calculation methods for buckling and post-buckling of aircraft tail inclined stiffened panel under compression load

Design and Experimental Verification of Composite Stiffened Panel under Combined Compression-Shear Loads

Experimental Investigation on Deformation and Strength of Carbon/epoxy Laminated Curved Beams

Experiment study of dynamic buckling for stiffened panels under longitudinal impact

A Study of the Buckling Behaviour of Stiffened Panels under Compression and Lateral Pressure

Test and Numerical Model of Curved Steel-Concrete Composite Box Beams under Positive Moments

Experimental and numerical analysis of ultimate compressive strength of long-span stiffened panels