Abstract:Conventional PCC pile technique has been widely used as embankment piles for highway construction in China. To further improve the PCC pile capacity, the expansive concrete technique has been applied to the PCC pile to replace the normal concrete recently. The use of expansive concrete for the PCC pile could increase the pile diameter as well as the contact pressure at the pile-soil interface due to the expansion process of concrete, which allows the improved PCC pile to provide higher capacity than the conventional PCC pile. This paper presents a theoretical model for the new improved PCC pile using expansive concrete technique. The model is formulated by assuming the PCC pile installation process as large strain undrained cylindrical cavity expansion and the subsequent pile shaft expansion combined with soil consolidation process is simulated by the small strain cylindrical cavity expansion combined with strain-controlled consolidation. Then, similarity solution technique is used to solve the problem of cavity expansion in modified cam Clay (MCC) model, while the strain-controlled consolidation is calculated through the finite difference method (FDM). Subsequently, the suitability of the cavity expansion solution in the interpretation of the PCC pile installation is verified by comparing the calculated excess pore pressure with the measured value in an instrumented field test. The stress changes and excess pore pressure during the PCC pile installation and subsequent pile shaft expansion are investigated by means of parametric study. The proposed theoretical model first reveals and quantifies the fundamental mechanism of the PCC pile using expansive concrete technique and it provides a theoretical basis for developing design methods of the new improved PCC pile in the future.

Xcc Pile Installation Effect in Soft Soil Ground: A Simplified Analytical Model

Large-Deformation Finite-Element Simulation of Deformation and Strain Fields Resulting from Closed-End Displacement Pile Installation in Sand

Large Deformation Analysis of Intermittent Pile Penetration into Dense Sand Incorporating a State Dependent Mohr–Coulomb Model

Influence of the Penetration of Adjacent X-section Cast-in-place Concrete (XCC) Pile on the Existing XCC Pile in Sand

Experimental Study on the Development of Surrounding Soil Stress During XCC Pile Installation in Sand

A Simplified Planar Model for Geosynthetics Reinforced Composite Foundation Subjected to Vertical Load

Simplified Method for Calculating Ground Lateral Displacement Induced by Foundation Pit Excavation

Analytical Approach to Axially Loaded Concrete Core-Cement Soil Composite Pile

Performance of X-section Cast-in-place Concrete Piles for Highway Constructions over Soft Clays

A Simplified Nonlinear Calculation Method to Describe the Settlement of Pre-Bored Grouting Planted Nodular Piles

Theoretical Model for the Improved PCC Pile Using Expansive Concrete

Influence Of Excavation Unloading On Vertical Bearing Behavior Of Existing Pile Groups

Finite Element Analysis of Compacting Displacements of Single Jacked Pile

Analytical modeling for the behavior of concrete-cored cement mixing (CCM) pile composite foundation under embankment

Displacement and Force Analyses of Piles in the Pile-Caisson Composite Structure under Eccentric Inclined Loading Considering Different Stratum Features

Dynamic Impedances and Free-Field Vibration Analysis of Pile Groups in Saturated Ground

Analysis of Soil Movement Around a Loaded Pile Induced by Deep Excavation

Numerical analysis on the performance of a cushioned foundation with a mixture of both rigid and flexible piles

On Vertical Dynamic Stability and Cross‐section Optimization of Closed‐ended Hollow Pile by Considering Soil Compaction Effects

Simplified method for predicating consolidation settlement of soft ground improved by floating soil-cement column

Elastic Solutions for Partially Embedded Single Piles Subjected to Simultaneous Axial and Lateral Loading