Abstract:To enhance the mechanical performance and corrosion resistance of refractory high-entropy alloys (RHEAs) and to identify materials better suited for severe high-temperature and corrosive environments, this study utilized a double glow plasma surface alloying technique to fabricate a W-Ta-Cr-V-N refractory high-entropy nitride coating on a W substrate. The microstructure and phase structure of the samples were characterized using a scanning electron microscope and X-ray diffractometer. The mechanical properties of the samples were evaluated through microhardness testing, while their corrosion performance was assessed by potentiodynamic polarization and electrochemical impedance spectroscopy measurements. The study investigated the effects of different nitrogen contents on the microstructure, mechanical properties, and corrosion resistance of the BCC-structured W-Ta-Cr-V alloy in the past tense. The study found that the doping of an appropriate amount of nitrogen can lead to the formation of FCC and HCP structured nitrides. As the nitrogen content increases, there is a significant change in the preferred orientation of the coating. When the nitrogen content is 16.6 at.%, the distribution of the nitrides is uneven, resulting in increased surface undulations and roughness. Conversely, when the nitrogen content is elevated to 48.1 at.%, the clustering of surface nitride particles becomes more pronounced, leading to a decrease in the coating density. The thickness of the nitride coatings is around 10 μm, with a slight decrease in thickness as the nitrogen content increases. The hardness of the coatings is significantly superior to that of the W-Ta-Cr-V alloy films, reaching up to 3465 HV 0.25 in the highest instance. The introduction of 31.4 at.% nitrogen results in the densest coating, effectively enhancing the corrosion resistance of the refractory high-entropy alloy. Therefore, the doping of an appropriate amount of nitrogen can alter the microstructure of the refractory high-entropy alloy, improve its mechanical properties, and enhance its chemical stability.

Improved Diffusion-Resistant Ability of Multicomponent Nitrides: From Unitary TiN to Senary High-Entropy (TiTaCrZrAlRu)N

Structural and Thermodynamic Factors of Suppressed Interdiffusion Kinetics in Multi-component High-entropy Materials

First-principles investigation of Cu/Ti-TM/Si (TM=W, Ru) interfaces: Role of Ti-TM binary alloys as diffusion barrier layers

Enhanced diffusion barrier property of nanolayered NbMoTaW/TiVCr high entropy alloy for copper metallization

Effect of tantalum and Ni Ta barriers on inter-diffusion between nickel coating and GH3535 alloy at 700 °C

Thermally Stable Amorphous (Almonbsitativzr)(50)N(50) Nitride Film As Diffusion Barrier In Copper Metallization

Structural stability of thermoelectric diffusion barriers: Experimental results and first principles calculations

Ab initio study of the alloying effect of transition metals on structure, stability and ductility of CrN

Tunable interstitial and vacancy diffusivity by chemical ordering control in CrCoNi medium-entropy alloy

A Heating and Diffusion Barrier Based on TaSiNx for Miniaturized IC Devices

Sputtered Ru–Ti, Ru–N and Ru–Ti–N Films As Cu Diffusion Barrier

Tan/Ta As an Effective Diffusion Barrier for Direct Contact of Copper and Nisi

Ultrafast synthesis and pressureless densification of multicomponent nitride and carbonitride ceramics

Diffusion bonding of copper to titanium using CoCrFeMnNi high-entropy alloy interlayer

Improvement of Diffusion Barrier Performance of Ru Thin Film by Incorporating a WHfN Underlayer for Cu Metallization

Enhancement of vacancy diffusion by C and N interstitials in the equiatomic FeMnNiCoCr high entropy alloy

TaN Diffusion Barrier Layers Deposited by Reactive Magnetron Sputtering

Influence of compositional complexity on interdiffusion in Ni-containing concentrated solid-solution alloys

The influence of nitrogen content on the microstructure and properties of W-Ta-Cr-V-N refractory high-entropy nitrides

Improved diffusion barrier performance of Ru/TaN bilayer by N effusion in TaN underlayer

Improved diffusion barrier properties and NiSi thermal stability for the Cu contact with the Ru/TaSiN stack on NiSi/Si