Abstract:The concentration of silver nanoparticles (nano-Ag) in aqueous media influences the kinetics of ion release; hence, the transformation and stability of nano-Ag are also influenced. The stability, dissolution and further transformation of nano-Ag in aqueous media at predicted environmental concentrations (PECs) <=mu g/L may differ from that reported at higher concentrations. Analytical techniques characterizing nanoparticles (NPs) at mu g/L have advantages and limitations, including an inherent bias based on theoretical and analytical considerations, as well as the matrix effects. In this work, we applied nanoparticle tracking analysis (NTA), single particle ICP-MS (sp-ICP-MS), and localized surface plasmon resonance (LSPR) analysis to study the stability and dissolution of nano-Ag with different nominal sizes (20, 40, 80 and 100 nm) at PECs in synthetic wastewater (SWW). The influence of the main wastewater constituents, such as organic matter, Cl-, S2-, PO43- and NH4+, on the stability and dissolution of nano-Ag (40 nm) at PECs was also determined. Diagrams of the predominant species of silver exposed to major ligands were generated using MINTEQ. After 5 h in SWW, 20 nm nano-Ag dissolved 19.27% and 40 nm nano-Ag dissolved 14.8%. Aggregates of Ag particles were clearly noted for 80 and 100 nm nano-Ag after 5 h of exposure to SWW. Aggregates size also ranged very similar for both techniques, NTA and sp-ICPMS, 29-211 nm and 38-241 for NTA and 48-210 and 50-220 nm, for sp-ICP-MS, respectively. Mono-dispersed size distribution (22-85 nm) and low dissolution (up to 5.1%) of nano-Ag at PECs were observed in presence of organic matter (5-800 mu g/L) and PO43- (9.5-47.5 mg/L), while precipitation and higher dissolution (up to 74.9%) were observed in media containing either Cl- (0.07-10.64 g/L), S2- (0.32 -32.1 mg/L) or NH4+ (36-90 mg/L), respectively. Speciation diagrams predict the formation of Ag2S(s) and AgCl(s), and soluble species such as AgClx(x-1)-, AgNH(3)(+ )and Ag(NH3)(2+) when Ag+ at PECs in wastewater. The NTA and sp-ICP-MS were suitable techniques for sizing nano-Ag in wastewater at PECs at experimented nominal sizes. sp-ICP-MS was also useful to quantify the coexistence of Ag+ and nano-Ag. The LSPR analysis served to determine the relative persistence of original nano-Ag at PECs in the wastewater during the first 5 h after spiking. (C) 2019 Elsevier Ltd. All rights reserved.

Dispersive Liquid–liquid Microextraction of Silver Nanoparticles in Water Using Ionic Liquid 1-Octyl-3-methylimidazolium Hexafluorophosphate

Sensitive measurement of silver ions in environmental water samples integrating magnetic ion-imprinted solid phase extraction and carbon dot fluorescent sensor

Dispersive Liquid–Liquid Microextraction and Micro-Solid Phase Extraction for the Rapid Determination of Metals in Food and Environmental Waters

Cloud point extraction (CPE) combined with single particle -inductively coupled plasma-mass spectrometry (SP-ICP-MS) to analyze and characterize nano-silver sulfide in water environment

Silver nanoparticle-functionalized melamine-formaldehyde aerogel for online in-tube solid-phase microextraction of polycyclic aromatic hydrocarbons followed by HPLC-DAD analysis

High efficient removal of silver nanoparticles by coagulation with tetraethylenepentamine modified silica

Silver ion-imprinted magnetic adsorbent hyphenated to single particle-ICP-MS for separation and analysis of dissolved silver and silver nanoparticles in antibacterial gel extracts

In situ characterization of silver nanoparticles sulfidation processes in aquatic solution by hollow fiber flow-field flow fractionation coupled with ICP-QQQ

Investigating the behavior of ultratrace levels of nanoparticulate and ionic silver in a seawater mesocosm using single particle inductively coupled plasma - mass spectrometry

Development of new portable miniaturize solid phase microextraction of silver-APDC complex using micropipette tip in-syringe system couple with electrothermal atomic absorption spectrometry

Efficient solid-phase extraction of Pb 2+ , Cd 2+ , and Cr 3+ using ionic liquid-based bis(trifluoromethylsulfonyl)imide grafted onto silica gel as a novel sorbent

Selective extraction of emerging contaminants from water samples by dispersive liquid-liquid microextraction using functionalized ionic liquids

Efficient Extraction and Analysis of Nanoplastics by Ionic Liquid-Assisted Cloud-Point Extraction Coupled with Electromagnetic Heating Pyrolysis Mass Spectrometry

An in Situ Ionic Liquid Dispersive Liquid-Liquid Microextraction Method for the Detection of Pyrethroids by Lc-Uv in Environmental Water Samples

Fractionation and preconcentration of silver nanoparticles at environmentally relevant concentrations through induced eco-corona formation and spICP-MS characterization

Applications of coagulation-sedimentation and ultrafiltration for the removal of nanoparticles from water

Solvent (ionic liquid) impregnated resin-based extraction coupled with dynamic ultrasonic desorption for separation and concentration of four herbicides in environmental water

Multi-technique Approach to Study the Stability of Silver Nanoparticles at Predicted Environmental Concentrations in Wastewater

Ionic Liquid-Solidified Floating Organic Drop Microextraction for the Preconcentration of Lead in Environmental Water Samples Prior to Its Determination with Electrothermal Atomic Absorption Spectrometry

Simple, fast and eco-friendly micro-solid phase extraction based on thiol and ionic liquid bi-functional nanofibers membrane for the determination of sulfonamides in environmental water

Removal of polymethyl methacrylate nanoplastics and silver nanoparticles by a novel ferrofluid-COF-aminated natural cotton-based hydrogel nanosorbent