Abstract:The concentration of silver nanoparticles (nano-Ag) in aqueous media influences the kinetics of ion release; hence, the transformation and stability of nano-Ag are also influenced. The stability, dissolution and further transformation of nano-Ag in aqueous media at predicted environmental concentrations (PECs) <=mu g/L may differ from that reported at higher concentrations. Analytical techniques characterizing nanoparticles (NPs) at mu g/L have advantages and limitations, including an inherent bias based on theoretical and analytical considerations, as well as the matrix effects. In this work, we applied nanoparticle tracking analysis (NTA), single particle ICP-MS (sp-ICP-MS), and localized surface plasmon resonance (LSPR) analysis to study the stability and dissolution of nano-Ag with different nominal sizes (20, 40, 80 and 100 nm) at PECs in synthetic wastewater (SWW). The influence of the main wastewater constituents, such as organic matter, Cl-, S2-, PO43- and NH4+, on the stability and dissolution of nano-Ag (40 nm) at PECs was also determined. Diagrams of the predominant species of silver exposed to major ligands were generated using MINTEQ. After 5 h in SWW, 20 nm nano-Ag dissolved 19.27% and 40 nm nano-Ag dissolved 14.8%. Aggregates of Ag particles were clearly noted for 80 and 100 nm nano-Ag after 5 h of exposure to SWW. Aggregates size also ranged very similar for both techniques, NTA and sp-ICPMS, 29-211 nm and 38-241 for NTA and 48-210 and 50-220 nm, for sp-ICP-MS, respectively. Mono-dispersed size distribution (22-85 nm) and low dissolution (up to 5.1%) of nano-Ag at PECs were observed in presence of organic matter (5-800 mu g/L) and PO43- (9.5-47.5 mg/L), while precipitation and higher dissolution (up to 74.9%) were observed in media containing either Cl- (0.07-10.64 g/L), S2- (0.32 -32.1 mg/L) or NH4+ (36-90 mg/L), respectively. Speciation diagrams predict the formation of Ag2S(s) and AgCl(s), and soluble species such as AgClx(x-1)-, AgNH(3)(+ )and Ag(NH3)(2+) when Ag+ at PECs in wastewater. The NTA and sp-ICP-MS were suitable techniques for sizing nano-Ag in wastewater at PECs at experimented nominal sizes. sp-ICP-MS was also useful to quantify the coexistence of Ag+ and nano-Ag. The LSPR analysis served to determine the relative persistence of original nano-Ag at PECs in the wastewater during the first 5 h after spiking. (C) 2019 Elsevier Ltd. All rights reserved.

Cloud point extraction (CPE) combined with single particle -inductively coupled plasma-mass spectrometry (SP-ICP-MS) to analyze and characterize nano-silver sulfide in water environment

Speciation Analysis of Ag2S and ZnS Nanoparticles at the Ng/l Level in Environmental Waters by Cloud Point Extraction Coupled with LC-ICPMS

Separation and determination of silver nanoparticle in environmental water and the UV-induced photochemical transformations study of AgNPs by cloud point extraction combined ICP-MS.

Analysis of silver and gold nanoparticles in environmental water using single particle-inductively coupled plasma-mass spectrometry.

Extraction Method Development for Quantitative Detection of Silver Nanoparticles in Environmental Soils and Sediments by Single Particle Inductively Coupled Plasma Mass Spectrometry.

Cloud Point Extraction As an Advantageous Preconcentration Approach for Analysis of Trace Silver Nanoparticles in Environmental Waters

Characterization and Determination of Silver Nanoparticle Using Single Particle-Inductively Coupled Plasma-Mass Spectrometry

In situ characterization of silver nanoparticles sulfidation processes in aquatic solution by hollow fiber flow-field flow fractionation coupled with ICP-QQQ

Investigating the behavior of ultratrace levels of nanoparticulate and ionic silver in a seawater mesocosm using single particle inductively coupled plasma - mass spectrometry

Multi-technique Approach to Study the Stability of Silver Nanoparticles at Predicted Environmental Concentrations in Wastewater

Single Particle ICP-MS Combined with Filtration Membrane for Accurate Determination of Silver Nanoparticles in the Real Aqueous Environment

Intracellular silver speciation by coupling capillary electrophoresis to ICP-MS integrating a high performance spiral flow spray chamber

Silver ion-imprinted magnetic adsorbent hyphenated to single particle-ICP-MS for separation and analysis of dissolved silver and silver nanoparticles in antibacterial gel extracts

Evaluation of extraction and storage conditions for quantification and characterization of silver nanoparticles in complex samples by single particle-ICP-MS

Ligand-assisted Magnetic Solid Phase Extraction for Fast Speciation of Silver Nanoparticles and Silver Ions in Environmental Water.

Dispersive Liquid–liquid Microextraction of Silver Nanoparticles in Water Using Ionic Liquid 1-Octyl-3-methylimidazolium Hexafluorophosphate

Silver Nanoparticles in Aquatic Sediments: Occurrence, Chemical Transformations, Toxicity, and Analytical Methods

Room Temperature Cation Exchange Reaction in Nanocrystals for Ultrasensitive Speciation Analysis of Silver Ions and Silver Nanoparticles

Identification and Speciation of Nanoscale Silver in Complex Solid Matrices by Sequential Extraction Coupled with Inductively Coupled Plasma Optical Emission Spectrometry

[Silver Nanoparticles in Natural Water Environment: Source, Analysis and Transformation].

Sensitive measurement of silver ions in environmental water samples integrating magnetic ion-imprinted solid phase extraction and carbon dot fluorescent sensor