Abstract:The concentration of silver nanoparticles (nano-Ag) in aqueous media influences the kinetics of ion release; hence, the transformation and stability of nano-Ag are also influenced. The stability, dissolution and further transformation of nano-Ag in aqueous media at predicted environmental concentrations (PECs) <=mu g/L may differ from that reported at higher concentrations. Analytical techniques characterizing nanoparticles (NPs) at mu g/L have advantages and limitations, including an inherent bias based on theoretical and analytical considerations, as well as the matrix effects. In this work, we applied nanoparticle tracking analysis (NTA), single particle ICP-MS (sp-ICP-MS), and localized surface plasmon resonance (LSPR) analysis to study the stability and dissolution of nano-Ag with different nominal sizes (20, 40, 80 and 100 nm) at PECs in synthetic wastewater (SWW). The influence of the main wastewater constituents, such as organic matter, Cl-, S2-, PO43- and NH4+, on the stability and dissolution of nano-Ag (40 nm) at PECs was also determined. Diagrams of the predominant species of silver exposed to major ligands were generated using MINTEQ. After 5 h in SWW, 20 nm nano-Ag dissolved 19.27% and 40 nm nano-Ag dissolved 14.8%. Aggregates of Ag particles were clearly noted for 80 and 100 nm nano-Ag after 5 h of exposure to SWW. Aggregates size also ranged very similar for both techniques, NTA and sp-ICPMS, 29-211 nm and 38-241 for NTA and 48-210 and 50-220 nm, for sp-ICP-MS, respectively. Mono-dispersed size distribution (22-85 nm) and low dissolution (up to 5.1%) of nano-Ag at PECs were observed in presence of organic matter (5-800 mu g/L) and PO43- (9.5-47.5 mg/L), while precipitation and higher dissolution (up to 74.9%) were observed in media containing either Cl- (0.07-10.64 g/L), S2- (0.32 -32.1 mg/L) or NH4+ (36-90 mg/L), respectively. Speciation diagrams predict the formation of Ag2S(s) and AgCl(s), and soluble species such as AgClx(x-1)-, AgNH(3)(+ )and Ag(NH3)(2+) when Ag+ at PECs in wastewater. The NTA and sp-ICP-MS were suitable techniques for sizing nano-Ag in wastewater at PECs at experimented nominal sizes. sp-ICP-MS was also useful to quantify the coexistence of Ag+ and nano-Ag. The LSPR analysis served to determine the relative persistence of original nano-Ag at PECs in the wastewater during the first 5 h after spiking. (C) 2019 Elsevier Ltd. All rights reserved.

Fast Multielement Quantification of Nanoparticles in Wastewater and Sludge Using Single-Particle ICP-MS

Advancing surface river water preparation for nanoparticle quantification and characterization using spICP-MS or spICP-ToF-MS

Multi-technique Approach to Study the Stability of Silver Nanoparticles at Predicted Environmental Concentrations in Wastewater

Counting Nanoplastics in Environmental Waters by Single Particle Inductively Coupled Plasma Mass Spectroscopy after Cloud-Point Extraction and In Situ Labeling of Gold Nanoparticles

Ion-exchange resins improve the analysis of metal nanoparticles in wastewater using single-particle inductively coupled plasma-mass spectrometry

Simultaneous Measurements of Cr, Cd, Hg and Pb Species in Ng L-1 Levels by Interfacing High Performance Liquid Chromatography and Inductively Coupled Plasma Mass Spectrometry.

Field-Flow Fractionation Coupled to Inductively Coupled Plasma-Mass Spectrometry (FFF-ICP-MS): Methodology and Application to Environmental Nanoparticle Research

Incidence and Persistence of Silver Nanoparticles Throughout the Wastewater Treatment Process.

Towards Automated and High-Throughput Quantitative Sizing and Isotopic Analysis of Nanoparticles via Single Particle-ICP-TOF-MS

Size-classifiable quantification of nanoplastic by rate zonal centrifugation coupled with pyrolysis-gas chromatography-mass spectrometry

Identification and quantification of trace metal(loid)s in water-extractable road dust nanoparticles using SP-ICP-MS

Flow cytometry as a tool for the rapid enumeration of 1-μm microplastics spiked in wastewater and activated sludge after coagulation-flocculation-sedimentation

Analysis of Engineered Nanoparticles in Seawater Using ICP-MS-Based Technology: From Negative to Positive Samples

Interfacing Nanoliter Liquid Chromatography and Inductively Coupled Plasma Mass Spectrometry with an In-Column High-Pressure Nebulizer for Mercury Speciation.

Fractionation and preconcentration of silver nanoparticles at environmentally relevant concentrations through induced eco-corona formation and spICP-MS characterization

Determination of metallic nanoparticles in air filters by means single particle inductively coupled plasma mass spectrometry

Interlaboratory comparison of centrifugal ultrafiltration with ICP-MS detection in a first-step towards methods to screen for nanomaterial release during certification of drinking water contact materials

Quantitative Detection of Zinc Oxide Nanoparticle in Environmental Water by Cloud Point Extraction Combined ICP-MS

Identification and quantification of nanoplastics (20-1000 nm) in a drinking water treatment plant using AFM-IR and Pyr-GC/MS

Combining High-Resolution Mass Spectrometry and Chemiluminescence Analysis to Characterize the Composition and Fate of Total N -Nitrosamines in Wastewater Treatment Plants

Engineered silver nanoparticle (Ag-NP) behaviour in domestic on-site wastewater treatment plants and in sewage sludge amended-soils