Abstract:A novel approach was proposed for the extraction of gallium from high-ferric and strongly acidic sulfate leach solutions from zinc refinery residue. The stepwise separation was carried out using N235 and Cyanex 272 in the first and second steps, respectively. The results showed that N235 could selectively remove iron and H2SO4 and provide suitable conditions for the subsequent extraction by Cyanex 272. The co-extracted zinc, gallium, and iron were separated by stepwise stripping. In batch tests, 97.9% of iron was selectively extracted from solutions through three-stage cross-current extraction by using an organic system consisting of 30% (v/v) N235 and 10% (v/v) tributyl phosphate in sulfonated kerosene with an aqueous/organic (A/O) ratio of 1:1, while the percentage extractions of other metals were <3% (the separation factors of βFe/Ga, βFe/Zn, βFe/Cu, and βFe/Cd, were determined to be 4.1×103, 1.7×103, 1.8×103, and 2.3×103, respectively). In the loaded organic system, 99.7% of iron was stripped using 0.5 mol/L H2SO4 followed by treatment with a sodium carbonate solution for regeneration. The raffinate with pH = 2.67 could be directly used for the extraction by Cyanex 272. A total of >99.9% gallium, >99.9% remaining iron, and 49.7% zinc were co-extracted through four-stage counter-current extraction by using an organic system consisting of 30% (v/v) Cyanex 272 in sulfonated kerosene with an A/O ratio of 1:1, while the percentage extractions of other metals (copper and cadmium) were negligible (the separation factors of βGa/Zn, βGa/Fe, βGa/Cu, and βGa/Cd, were determined to be 6.1×103, 2.7×10-1, 3.3×106, and ∞, respectively). Furthermore, >99.9% zinc, 99.7% gallium, and 98.9% iron in the loaded organic system were efficiently separated through a stepwise stripping process by using 6 mol/L HCl, 0.5 mol/L H2SO4, and 0.6 mol/L H2C2O4 (the separation factors of βZn/Ga, βZn/Fe, and βGa/Fe, were determined to be 1.1×106, 4.4×104, and 6.4×104, respectively). Overall, 99.7% of gallium was separated and extracted into the strip liquor, resulting in a concentration of 1502 mg/L.

Extraction and separation of indium and copper from zinc residue leach liquor by solvent extraction

Reductive leaching of indium and zinc from zinc neutral leach residue with sulphuric acid and sulphur dioxide

Solvent Extraction of Copper and Zinc from Bioleaching Solutions with LIX984 and D2EHPA

Extraction of Indium from Indium-Zinc Concentrates

Recovery Of Indium From Zinc Oxide Flue Dust

Reductive leaching kinetics of indium and further selective separation by fraction precipitation

Extraction of Valuable Metals from High-Iron Zinc Sulfide Concentrate by Reductive Leaching

Recovery of indium and germanium from In-Ge residue leaching solution using solvent extraction and tannin precipitation

Reductive Leaching of Zinc and Indium from Industrial Zinc Ferrite Particulates in Sulphuric Acid Media

Study on the Method of Recovering and Separating Indium from Residue Containing Indium

Recovery of gallium from leach solutions of zinc refinery residues by stepwise solvent extraction with N235 and Cyanex 272

Reductive Leaching of Indium-Bearing Zinc Residue in Sulfuric Acid Using Sphalerite Concentrate As Reductant

Using an Interdigital Micromixer for Separation of In3+ from Zinc Hydrometallurgical Process with D2EHPA As an Extractant

Reductive leaching of indium from zinc-leached residue using galena as reductant

Recovery of Indium from Hard Zinc Slag by Pressure Leaching and Solvent Extraction

Study on extracting indium from indium-zinc concentrates

Acid Leaching Zinc And Indium With Reduction Ferric Simultaneously From Marmatite And High-Iron Neutral Leaching Residue

Separation of Zinc from Acid-in-extractant Leaching Solution of Copper Converter Dust

Recovery of Zinc from Low-Grade Zinc Oxide Ores by Solvent Extraction

Recovery and Separation of Gallium(iii) and Germanium(iv) from Zinc Refinery Residues : Part II: Solvent Extraction

A novel method for the treatment of indium-contained zinc concentrate