Recovery and Separation of Gallium(iii) and Germanium(iv) from Zinc Refinery Residues : Part II: Solvent Extraction

Fupeng Liu,Zhihong Liu,Yuhu Li,Benjamin P. Wilson,Zhiyong Liu,Li Zeng,Mari Lundstrom

DOI: https://doi.org/10.1016/j.hydromet.2017.05.009

IF: 4.217

2017-01-01

Hydrometallurgy

Abstract:The extraction of both Ga(III) and Ge(IV) was achieved using an organic system consisting of tri(octyl-decyl) amine (N235), tributyl phosphate (TBP) in sulfonated kerosene from iron-removed leach solution. The extraction equilibria of both metals were obtained within 10min at 30°C. More than 99.0% Ga(III) and 99.8% Ge(IV) were extracted in a three-stage counter current extraction using an organic system consisting of 20% (v/v) N235, 10% (v/v) TBP and 70% (v/v) sulfonated kerosene at an A/O ratio of 3:1 and 30°C for 10min. Over 99.0% Ga(III) was selectively stripped from the loaded organic solution by three-stage counter current stripping using 2.5mol/L H2SO4 at an A/O ratio of 1:2 and 30°C for 15min, resulting in a loaded strip liquor containing 3.8g/L Ga(III). After Ga(III) stripping, 99.8% Ge(IV) was stripped by two-stage counter current stripping using 4mol/L NaOH at an A/O ratio of 1:3 and 40°C for 15min, resulting in a final loaded strip liquor containing 8.3g/L Ge(IV). A conceptual flowsheet has been developed to recover Ga(III) and Ge(IV) from zinc refinery residues using two-stage leaching with H2SO4 and oxalic acid, subsequently, iron removal with iron powder and solvent extraction with N235 and TBP.