Abstract:In this study, we propose a novel temperature-programmed ammonium chloride (NH4Cl) roasting–water-leaching process to extract nickel (Ni), cobalt (Co), and copper (Cu) from polymetallic sulfide minerals in a synchronous, efficient, and environment-friendly manner. During the roasting process, several vital parameters were investigated to achieve the high co-sulfation of Ni, Co, and Cu. The dosage of NH4Cl was drastically reduced, and chlorine-free calcine was obtained using a chlorination–sulfation roasting schedule. The results suggest that the water-leaching yields of Ni, Co, and Cu reached ~ 97, ~ 95, and ~ 99 pct, respectively, whereas that of iron was ~ 1 pct under the following optimized conditions: the first roasting step temperature was 250 °C, the heating rate was 2 °C/min, the dosage of the NH4Cl additive was 80 mg/g(ore), the holding times at 250 °C and 650 °C were 120 and 60 minutes, respectively, and the particle size of the NH4Cl additive was smaller than 75 μm. The phase evolution as well as the chlorination and sulfation mechanisms during the three-step roasting process were examined by the roasting–leaching experiments and the X-ray diffraction, energy-dispersive X-ray spectroscopy, and thermodynamic calculations. The results indicate that sulfide chlorination occurred because of the NH4Cl additive and the formed intermediates, including metal chlorides and chlorine gas. The chlorides of Ni, Co, and Cu were successfully transformed into sulfates. The temperature-programmed NH4Cl roasting–water-leaching process considerably improves the selective sulfation of the nonferrous metals. Furthermore, this is a promising technique for separating and extracting nonferrous metals from iron-based sulfide materials.<h3 class="a-plus-plus">Graphic </h3>

A Novel Strategy Achieving Enrichment of Metal Values from and into Ammoniacal Solutions

Zinc Recovery from Dilute Ammoniacal Media Using an Integrated Solvent Extraction and Electrolysis Process

Enrichment of valuable metals from the sulfuric acid leach liquors of nickeliferous oxide ores

Synergistic extraction of zinc from ammoniacal ammonia sulfate solution by a mixture of a sterically hindered beta-diketone and tri-n-octylphosphine oxide (TOPO)

Membrane-assisted Enrichment of Zinc(ii) from and into Ammoniacal Media Through Non-Dispersive Synergistic Extraction

Synergistic Extraction of Zinc from Ammoniacal Solutions Using Β-Diketone Mixed with CYANEX923 or LIX84I

Extraction of Cu and Ni from Low-Ni Matte by a Combined Chemical Precipitation and Molten Salt Electrolysis Approach

Extraction Enhancement of Zinc(ii) in Ammoniacal Media Through Solvent and Synergistic Effects: A Structural, and Mechanistic Investigation

Selective Co-Extraction of Critical Metals from Deep Ocean Polymetallic Nodule Leachate and Preparation of Battery-Grade Ni-Co-Mn Solution

Enrichment strategies of heavy metals in the O/H/O process composed of biological fluidized bed for wastewater treatment: A case study of Cu and Zn

Solvent extraction equilibrium modeling for the separation of ammonia, nickel(II), and copper(II) from the loaded LIX84-I

A metallurgical approach for separation and recovery of Cu, Cr, and Ni from electroplating sludge

Hydrometallurgical Process for Zinc Recovery from C.Z.O. Generated by the Steelmaking Industry with Ammonia–Ammonium Chloride Solution

Solvent Extraction of Copper and Zinc from Bioleaching Solutions with LIX984 and D2EHPA

Selective and Efficient Extraction of Cu(II) from a Complex Sulfate Solution Containing Co(II), Fe(II), Cu(II), and Zn(II) Using DZ988N

A Novel Ammonium Chloride Roasting Approach for the High-Efficiency Co-sulfation of Nickel, Cobalt, and Copper in Polymetallic Sulfide Minerals

Efficient and Selective Recovery of Ni, Cu, and Co from Low-Nickel Matte Via a Hydrometallurgical Process

Understanding and controlling the key phase transformation for selective extracting Ni and Cu from Cr-containing electroplating sludge

A Method for Extracting Valuable Metals from Low Nickel Matte by Non-Oxidative Leaching with H2SO4

Zinc Extraction from Ammoniacal Solutions with Mixture of LIX84 and LIX54

Solvent Extraction of Copper from Ammoniacal Chloride Solutions by Sterically Hindered Β-Diketone Extractants