Abstract:Building external walls and fire insulation are important components of a low carbon economy. Once a fire occurs in the building, the ejected flame from the opening of the building can easily ignite the building external wall insulation materials and further resulting the catastrophic large-scale facade fire. The paper investigates experimentally the temperature evolution within fire compartment, the external flame merging behavior and the structure characteristic (height/area) ejected through multiple-openings comprehensively for various numbers of openings and separation distances (with a fixed overall opening size) and fire heat release rates with a total of 272 conditions. A rectangle reduced-scale fire compartment and an external facade was designed with various multi-opening conditions (numbers of openings, separations). Results show that the upper-part temperature within fire compartment first increases and then changes a little around 1000 K, it is correlated well by the heat release rate and heat loss per unit time for over-ventilated conditions, while it correlated well with the opening factor for under-ventilated condition. Regardless of the number of openings, it only depends on the overall opening size. The external flame merging probability increases (from 0 to 1) with increasing number of openings and fire HRR, which correlated well as a function of the non-merging flame height from a single opening (or the flame upward velocity) and the separation distances between the adjacent two openings. The external flame height decreases (about from 1.0 m to 0.3 m) with increasing number of openings. A new characteristic length scale, considering the multiple rectangle fire sources at the neutral plane was proposed to describe the external flame height. The external flame area is further estimated based on the flame height and the merging probability. The experimental data and correlations obtained in this paper contribute a fundamental basis for quantifying the characteristics of the building fire, selection of building external wall insulation materials and building energy saving.

Correlation Study Between Flammability and the Width of Organic Thermal Insulation Materials for Building Exterior Walls

Experimental Study on the Width and Pressure Effect on the Horizontal Flame Spread of Insulation Material

The research for new material and new technology of exterior walls thermal insulation

Experimental Study Of Thermal Behavior Of Insulation Material Rigid Polyurethane In Parallel, Symmetric, And Adjacent Building Facade Constructions

Flame behavior and fire-induced flow field characteristic in building corridor fire with longitudinal partition

Full-scale Experimental Study on Vertical Fire Spread Characteristics of Different Organic Insulation Systems

Thermal Analysis and Flame Spread Behavior of Building-Used Thermal Insulation Materials

Experimental Study on Upward Flame Spread of Exterior Wall Thermal Insulation Materials

Research on the Influence of Environmental Pressure on the Combustion Characteristics and Fire Spread of Building External Wall Insulation Materials

Simulation of Fire Spread of Typical External Wall Insulation Materials in High-rise Building

Flammability and Safety Design of Thermal Insulation Materials Comprising PS Foams and Fire Barrier Materials

Experimental Study on Downward Flame Spread of Rigid Polyurethane Foam with External Radiation

Experimental study on combustion phenomena of external wall thermal insulation material in the fire

Experimental Study on the Fire Spread in High-Rise Buildings with U-shaped Outside-Facade Structure

Experimental Investigation of Downward Discrete Flame Spread of the Thermoplastic Material in Exterior Insulation Walls: Melt-Flowing and -Dripping

Heat Transfer Mechanism of Concurrent Flame Spread over Rigid Polyurethane Foam: Effect of Ambient Pressure and Inclined Angle

Experimental Study on Fire Risk of Buildings’ U-shaped Exterior Wall on Flame Propagation of Insulation Material on Plain and Plateau

Temperature Evolution Within Fire Compartment, External Flame Structure Characteristic and Merging Behavior with Multiple-Openings

Large Scale Experimental Study on the Fire Hazard of Buildings’ U-shape Façade Wall Geometry

Thermal and fire risk analysis of typical insulation material in a high elevation area: Influence of sidewalls, dimension and pressure

Impact of core thickness and opening height on the combustion characteristics of polyethylene sandwich panels