Abstract:The use of split-type air-conditioners in new apartment buildings becomes popular in Hong Kong. One requirement for their effective use is satisfactory heat rejection at the outdoor condensing units. When a group of outdoor units is working together, the heat released by one condenser may affect the heat rejection rates at the others, and hence may deteriorate their performance. At the layout-design stage, an HVAC engineer often finds it difficult to predict such a thermal effect, say, when over a hundred of these out d or units are to be placed inside one single re-entrant of a high-rise building. This paper presents a simulation approach to tackle the problem. The computation technique is demonstrated by its application to evaluate the effect of proper spacing between adjacent condensing units. INTRODUCTION Most residents of Hong Kong live in high-rise apartment buildings. New apartment buildings in the city are typically comprised of a number of residence towers standing on a common podium garden (see Figure 1). Covered car-park, shopping mall, and other supporting facilities are often found below the podium level. The floor plan of each residence tower is based on a cruciform design with its four wings radiating out from the building core. At the building core are the communal space like lift shafts, lift lobbies, corridors, meter rooms, and public stairs etc. Typically there are eight flats on a single floor, two at each wing. A narrow but deep re-entrant exists at each wing between the neighbouring flats [1]. These re-entrants provide ventilation and natural light to the kitchens and the toilets of the apartments. In recent years, split-type air-conditioners are widely adopted as a standard provision in new apartments to serve the living/dining rooms and the bedrooms. The distinct advantages of split-type units lie in the quiet operation and the flexibility in multi-room services [2]. By placing the outdoor condensing units inside the re-entrants, the provision can retain a clean and tidy external look of the building – not being spoiled by the windowmounted air-conditioners as it was used to be in the previous design. However, it is known that for split-type units, effective cooling performance of the indoor airconditioning units requires effective heat dissipation at the outdoor condensing units. For a 30-storey apartment building, it is not surprising to have over a hundred of these out door units being placed inside a single re-entrant. Heat energy released altogether brings about a natural upward flow of air. Depending on the actual layout of the outdoor units, air temperature at the upper part of the re-entrant may reach an unacceptably high level. This could in turn downgrade the air-conditioner performance because of the unsatisfactory condenser-cooling condition, or even cause accidental trip of the air-conditioners. ENERGY PERFORMNANCE OF SPLITTYPE AIR-CONDITIONERS Performance of a split-type unit can be described by its coefficient of performance (COP). The value of COP varies with the instantaneous working conditions, for instance, the room air condition and the condenser-cooling condition. An airconditioner performs better at higher room temperature (T r), and lower condenser on-coil temperature (T o). The COP of a split-type unit can be related to T o by the following linear regression equations at different room temperature conditions:

Analysis of Heat Rejection from an Actual Large-Scale Air-conditioned Office Building by Field Measurements and Numerical Simulations

Performance Investigation of Convective and Radiant Heat Removal Methods in Large Spaces

Numerical Simulation of Thermal Environment for Outdoor Units at Building Re-Entrant

A Numerical Study on the Exergy Performance of a Hybrid Radiant Cooling System in an Office Building: Comparative Case Study and Analysis

Simulation and analysis of application of double coupling heat pump to high rise buildings in cold areas

A study on heat transfer load in large space buildings with stratified air-conditioning systems based on building energy modeling: Model validation and load analysis

Application of Entransy in the Analysis of HVAC Systems in Buildings

Spatial Distribution of Internal Heat Gains: A Probabilistic Representation and Evaluation of Its Influence on Cooling Equipment Sizing in Large Office Buildings

Numerical simulation and thermal comfort analysis of indoor air distribution in large space buildings

Experiment and Numerical Simulation on Ventilation System of Office Building

Studying thermal performance of split-type airconditioners at building re-entrant via computer simulation

Air conditioning energy consumption measurement and saving strategy analysis for an office building in hot summer and cold winter area

Effect of Heat Emitted by Air Conditioner on Cooling Loads from Heat Conduction through Envelope and from Outdoor Air

Data-driven Two-Step Identification of Building Thermal Characteristics: A Case Study of Office Building

Simulation of energy consumption of air conditioning system for an office building

Energy-Saving Operation Modes for a Heat Recovery Unit in Office Building

Numerical Simulation on Indoor Thermal Environment of Radiant Flooring Cooling System with Displacement Ventilation

Numerical analysis of outdoor thermal environment around buildings

Analysis of ineffective heating in intermittently heated office buildings in hot summer and cold winter areas

Full-scale numerical simulation and experimental validation of the thermal environment under the heating mode in an air-conditioned room

Simulation On Energy Performance Of Air-Conditioning System Assisted With Thermosyphon Used In Telecommunication Base Station