Abstract:Tin monosulphide (SnS) films have been successfully grown by a simple and low-cost wet chemical process, chemical bath deposition (CBD), using tin chloride and thioacetamide as precursors and tartaric acid as complexing agent. The layers were grown on glass substrate at different bath temperatures (Tb) that varied in the range 50–70°C. The energy dispersive X-ray analysis (EDAX) studies showed that all the grown films were nearly stoichiometric. The X-ray diffraction analysis indicated that the films had an intense peak at 31.6° that corresponds to the (111) plane of SnS and exhibited orthorhombic crystal structure. The intensity of (111) plane increases with the increase in bath temperature and became sharp at Tb=70°C, where the other crystal planes got suppressed, this indicates better crystallinity of the layers grown at this temperature. No other secondary phases of tin sulphide were observed. The structural parameters such as lattice constants and crystallite size were also calculated. The optical studies revealed that the layers had high optical absorption coefficient (>104 cm−1). The energy band gap was found to be allowed and direct and varied between 1.30 eV and 1.35 eV. The band gap decreased with the rise in bath temperature. The refractive index and the extinction coefficient were also evaluated. The details of these results will be presented and discussed.

The Structural Behaviour of Layers of Sns Grown by Spray Pyrolysis

Growth of polycrystalline SnS films by spray pyrolysis

Investigations on SnS films deposited by spray pyrolysis

Optical behaviour of sprayed tin sulphide thin films

Electrical properties of spray pyrolytic tin sulfide films

Preparation and characterisation of sprayed tin sulphide films grown at different precursor concentrations

SnS Films for Photovoltaic Applications: Physical Investigations on Sprayed SnxSy Films

Crystalline Behaviour of Sns Layers Produced by Sulfurization of Sn Films Using H2s

X-Ray Photoelectron Spectroscopy and X-Ray Diffraction Studies on Tin Sulfide Films Grown by Sulfurization Process

Structural studies on SnS films grown by a two-stage process

[Study of the Physical Properties of SnS Thin Films Deposited by Ultrasonic Spray Pyrolysis Method].

Properties of Tin Monosulphide Films Grown by Chemical Bath Deposition

Physical Investigations on ZnO:Ni Layers Deposited by Spray Pyrolysis

Preparation of In_2S_3 Thin Films by Ultrasonic Spray Pyrolysis and the Influence of Post Rapid Thermal Process

Structural, Optical, and Electro-Optical Properties of Thermally Evaporated Tin Sulphide Layers

Structural and Hydrophilic Properties of TiN Films Prepared by Ultrasonic Atomization Assisted Spray Method under Low Temperature

Synthesis and characterisation of co-evaporated tin sulphide thin films

Physical Properties of Nano-crystalline SnS2 Layers Grown by Chemical Bath Deposition

On the Structural and Optical Properties of Sns Films Grown by Thermal Evaporation Method

Highly Transparent and Conducting Cdo Films Grown by Chemical Spray Pyrolysis

Structural/microstructural, optical and electrical investigations of Sb-SnO2 thin films deposited by spray pyrolysis